At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Suresh,
You don't say if the ghost is a particular colour, by ghost I suspect you mean similar to a drop shadow.
Firstly run off an internal test print, one of each colour if the grid lines are fine and showing no signs of shadow then your problem is not an internal problem. Don't send a C,M,Y,K test print from your computer, you can't eliminate colours that way.
If you can pin the problem down to one colour it could be a particular drum unit. Investigate from there.
Good Luck.
Your LCD panel has failed, common problem with older Samsung's and Sony's. It will cost more to replace the panel vs. buying a new TV set. If I have helped you please sign my guestbook!
You must make sure your PS3 is activated for your game DL's. Here is how to do it. At the XMB, sign in to PSN. When you do, a tab will open up that says account management. Scroll down to System activation. There, you can select to activate/deactivate your system and PSP for games and DLC content.
You must activate your system first. Here are the steps.
1 power on
2 log into the system
3 sign in to psn
4 Account Management
5 System Activation
6 PS3 System
7 Games and videos
Remember, SCEA only allows (2) systems to be activated under the same account. So even if you had 3 systems in your house, you can only activate 2. After your system is activated, then you can enjoy your new maps. ^^ P.S. As of this writing, "DEVASTATION" will be released for the PS3 TOMORROW!
You will need to have or change the convergence correction driver IC's. There are two of them in this TV set. Not a fix for a novice I'm afraid. If you have no solid state repair experience, play it safe and call out a pro to assist you in this repair.
×