Microwave Ovens Logo

Related Topics:

Question about Microwave Ovens

1 Answer

Delonghi combi microwave

Stopped working checked fuse in plug dont have manual cnt find how 2 change internal fuse

Posted by geo_wwd on

  • 2 more comments 
  • Agape45 Nov 20, 2007

    WHEN i TURN ON THE MICROWAVE THE MOTOR AND FAN RUNS BUT IT DOES NOT GET HOT ANYMORE. i DON'T KNOW WHERE THE FUSE IS LOCATED

  • Anonymous Dec 01, 2007

    i need a fuse location for a GE Microwave Spacemaker Model # JVM 64001 any ideas?????????

  • Anonymous Mar 17, 2008

    Checked ciruit break-OK. Tried another plug, still doesn't work.

  • fairmarket Sep 15, 2008

    I turn on my kenmore 66229 microwave (2 months old) and the light goes on but it does not heat up.

×

1 Answer

William Miller

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Microwave Ovens Master
  • 9,179 Answers

It may be the internal fuse, or the thermal fuse / thermostat / thermal cutout on the magnetron. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk

Posted on Sep 23, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Hello I have a delonghi combi microwave and every time I switch it on at the mains it switches on for about a second and then trips the fuse in main fuse box

There is a short in the primary electrical circuit.
A microwave technician will need to open the housing to check.
The actual location of the fault can vary widely, ranging from water / moisture causing a short, wires burnt or touching, fan motor cooked, control board fault, a loose live connector floating, lamp holder fault, etc.
0helpful
1answer

Panasonic invertor slimline combi

The main fuse in the microwave oven has blown, usually caused by one or two defective door switches.
2helpful
2answers

Microwave MH7130XEB-2 stopped working while cooking. Is now dead. Check plug and breaker box, they are ok. Is it an internal fuse? If so what part # do I need?

Hello :

Problem with the power transformer or the power PCB . Or it could be just a fuse . You need to check first . If it's the fuse , then that will be easy to solve , you need only to replace it with new one . But if the problem is with the transformer or with the PCB , you need to take your microwave to the service .

You could check for manual here :

Whirlpool MH7130XE Microwave Oven manual .

good luck .

rate please !

2helpful
1answer

Microwave not working

Magnetron may have died or internal fuse may have blown.Its could be all sorts of things.
May be time to buy a new one!

DO NOT TAKE OFF THE COVER YOUR SELVES, AS THEY MAY BE ELETRIC CHARGE STILL PRESANT EVEN WITH THE PLUG DISSCONNECTED
1helpful
1answer

Where is the 10 amp fuse on my delonghi micro/combo/grill please

Hi, I take it that this is a combi microwave? Some of these have settings on the front to microwave/grill/etc... so make sure its on the right one first!!
If you have selected the correct one then the m/wave does not work it could be several things!
Microwaves run to earth and need diodes to do this if these break down it will not m/wave! It could also be a internal fuse? ( but very unlikley if everything else works) Then you have the Mag or transformer which could be down to! M/waves run on a high power side and a low power side. The low power will not hurt you to much but the high power side will. My advice to uou is not to touch as it could be fatal as these things carry a high charge even when they are unplugged!
0helpful
1answer

Microwave stopped

It's probably the thermostat / thermal cutout (TCO) mounted on the magnetron or the cavity.

Be sure the end caps of the fuse are not loose. That can fool you.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Not finding what you are looking for?

1,914 views

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

Marvin
Marvin

Level 3 Expert

85242 Answers

Cindy Wells

Level 3 Expert

6648 Answers

john h

Level 3 Expert

29317 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...