Question about Dataproducts FP 2000A Matrix Printer

1 Answer

Data Products BP2000 printer (Digital LP29)

Getting numerous and different error codes everytime printer is powered on. Have replaced all boards in printer including power regulator board, mother board, bulk power supply and cap bank. Also, this printer is not equipped with an static bar/transformer.

Posted by joe390 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
One oof my customer is seeking this dataproduct bp2000 with or fp2000. Anyone can source this for me?

[email protected]

Posted on Jun 19, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does code c6230 mean?
C6230
Fuser thermistor 1 edge break error
Resetting the fuser problem data
Enter 10871087 using
the numeric keys.
Enter the maintenance item U163
number using numeric keys.
Press the start key.
Press [Execute].
Press the start key.
The fuser problem data is initialized
Turn the main power switch off and on.

Apr 30, 2014 | Copystar CS-3500i Copier, Printer"

1 Answer

Oven doesn't work. Panel shows "FFF"
FFF code - Control error, failed EEPROM

The main control operates a series of software commands, which control the various features and functions of the oven. Each function or operation has a numerical value assigned to it. The numerical values can be added up - this is called the check sum operation. Every time the system is powered up and after each clean cycle the system performs a check sum and compares the value to the value programmed into the software (stored in memory).

An EEPROM check sum error or FFF code occurs when the values differ. If this happens, replace the oven control board (also called clock or ERC).

Replace the oven control board (also called clock or ERC).

Hope this helps.

Jun 27, 2011 | Kitchen Ranges

2 Answers

49, 4c02 error in hp SPAM I AM 1-800-532-4187
This is what the result for that error code is:-
ERROR 49.XXXX
A critical firmware error has occurred that caused the processor on the formatter to abort the operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some instances, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor quality parallel cables, poor connections, or specific software programs. Remove all EIO devices and firmware DIMM if installed. Restart printer. If error is gone replace each EIO device until error appears. Replace device which triggers error. May also be formatter.
Firmware updates are available for some machines at http://hp.com and clicking on the drivers and software tab. Also try printing from a different application. If that works go back to the first application and try printing a different file to determine if the problem is file related. You may need to reseat the memory DIMM's or replace the firmware DIMM or formatter board.

Feb 08, 2011 | HP LaserJet 4250dtn Printer

1 Answer

Canon MP830 error 6500
Error 6500 is a logic board error code (= 'other hardware error').

Before committing to replacing a logic board, ensure that the error has not been generated and held by spurious external signals. Reseat the ink cartridges. Remove any memory card(s). Check any flaps / covers are properly closed (eg. CD printing cover). Turn off the printer and disconnect the power lead and USB lead to the computer. Leave the printer disconnected from power and data signals for several minutes, allowing time for any static electrical signals present on the logic board to discharge.

Reconnect printer and test.

Feb 25, 2010 | Canon PIXMA MP980 All-In-One InkJet...

1 Answer

Everytime I change the labels to a different size,
Disconnecting the power to the printer definitely works! Strange fix, but I'll take it at this point.

Oct 26, 2009 | Dymo LabelWriter 400 Turbo Thermal Printer

1 Answer

Error code
Hi there,

The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. but i suggest you to first of all you can try to reset your printer -

1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer.
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. 
4. Turn the printer back on. If this works you're done, if not try the next step.

1. After confirming that the printer is powered on, open the paper output tray.
2. Open the top cover and wait until the print head moves to the center.
3. Open the inner cover and check that ink tanks are properly seated.
4. Properly seated
5. Press down on each ink tank until a click is heard.
6. Close the inner cover and top cover

if reset method not works for you then you go for the new logic board replacement .............

Good Luck!!

Thanks

Oct 01, 2009 | Canon Office Equipment & Supplies

1 Answer

Screen shows error code 6500
Hi there,

The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. but i suggest you to first of all you can try to reset your printer -

1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer.
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. 
4. Turn the printer back on. If this works you're done, if not try the next step.

1. After confirming that the printer is powered on, open the paper output tray.
2. Open the top cover and wait until the print head moves to the center.
3. Open the inner cover and check that ink tanks are properly seated.
4. Properly seated
5. Press down on each ink tank until a click is heard.
6. Close the inner cover and top cover

if reset method not works for you then you go for the new logic board replacement .............

Good Luck!!

Thanks

Sep 09, 2009 | Canon Pixma iP6600D InkJet Photo Printer

2 Answers

Error code 6500
That error is an error processing on the main logic board, Canon suggests you replace the main logic pcb.

Aug 24, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Savin C3030
SC 553 is a fuser overheat error. If you have a fuser great, but you will still have to reset the code. Clear modes, 1, 0 ,7, press and hold clear/stop key. Menu will change, select copy sp. From there, select 5, (mode), scroll till you get to 5810. Select it, and press execute, then exit back to copy sp. Select 7 (data log) then scroll until you get to 7807. Select it, and press execute. Exit all of the way out, and recycle the power.

If it comes to ready, great. Try it. If it codes out again, you have a problem, possibly thermisters, (in the fuser), power supply getting stuck on, I/O board not regulating the power supply. Could be any of these things.

But start by resetting the code. Could be a a thermister got some toner stuck under it, and the other thermister detected a difference. It really could be that easy.

Mar 12, 2008 | Ricoh Aficio AP3800C Laser Printer

1 Answer

E04-14 error code
If your standing facing the back of the machine, you will need to change the top right fan that cools the IH,power supp. there are two fans which need to be replaced, the other fan is behind the sc pcb but that will give a different error.

Feb 15, 2008 | Panasonic DP-C354 Copier

Not finding what you are looking for?

View Most Popular

FP 2000A Matrix Printer

  • Office Equipment & Supplies

Related Question

What does code c6230 mean?

  • Copystar CS-3500i Copier, Printer"

Open Questions:

0 Answers

LP 29/Data Products BP2000\r\nThis is not a Matrix printer. It is printing lines that have a slight wave. The letters rise and recede accross the page. Roger NJ

Aug 13, 2010 | Dataproducts FP 2000A Matrix Printer

Related Topics

Dataproducts FP 2000A Matrix Printer Logo

Related Topics:

469 views

Ask a Question

Usually answered in minutes!

Popular Questions

2 Answers
Driver Dataproducts printer 8524

Dataproducts 8524 Matrix...

1 Answer
I need dataproducts 8524 prinetr

Dataproducts 8524 Matrix...

1 Answer
'move fric.lever' message. Kindly please explain.

Dataproducts 8524 Matrix...

1 Answer
Printer Driver

Dataproducts 8524 Matrix...

1 Answer
Printer driver

Dataproducts 8524 Matrix...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Dataproducts Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76582 Answers

Brad Brown

Level 3 Expert

18631 Answers

Are you a Dataproducts Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...