- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Probably. If you didn't discard the package of extra fittings that came with the dishwasher, you may find the correct adapter/aerator fitting in there. Otherwise, try contacting the manufacturer of the dishwasher. Be sure to provide the make and model of the new faucet along with the model number of the dishwasher.
Yes, you need to know whether your faucet is male or female thread (threads on outside or inside) and buy an adapter that will fit into the faucet where the aerator normally sits. These are generally available in the plumbing section of your local hardware store. Make sure you know your diameters as well (O.D. stands for Outside Diameter and is usually male thread where as I.D. stands for Inside Diameter and is usually female thread)
Hi, If you go to www.repairclinic.com they have the part you need. Make sure you enter the model # exactly like this 665.17625692 I hope this helps you. Vic please feel free to rate me response to you so that others as well as myself can see how I am doing. Thanks
I am assuming that you have the appropriate adapter on your faucet.
You are not actually getting the connector attached to the faucet.
Pull down on the locking collar while lifting the hose connector onto the faucet adapter.
When the connector snaps into place, release the locking
Turn the hot water on slowly until it is all the way on.