Manual Need Manual to this dvd player cannot get full sound only background sound need to get the HOOK UP!!! HELP PLEASE

DVD players normally don't have amps built into them. If you need to connect the DVD to amp (AV) then it will need to be connected either via an RF lead connected via RCA sockets marked RF OUT on the DVD player and one on the AV marked RF IN. If the AV has an optical in, then you can connect the DVD to that for better quality sound. You might also need to change the sound output settings on the DVD player to the correct one you are using.
Missing speaking sounds are the result of a lack of a centre channel speaker. If your AV doesn't have one. Then you will have to use the stereo only setting.
If the DVD player is only currently connected via the standard RCA left and right jacks, you will only get stereo sound.

your reciever does not have hdmi, so the audio is not going to be true DD+ or DTS for broadcast tv.

if your dvd/blue ray player has digital optical spdif, this can be used to transfer the encoded DD+/DTS digital audio.

the besat way to run your tv audio through the reciever is to hook up the dvd/blue ray player up with (perferrably) digital optical spdif, composite spdif or (least favorably) through the stereo stereo analog inputs on the reciever for "dvd" audio in and hook the video from the dvd/blue ray up to the corresponding "dvd" video component input on the reciever.

this way is only going to get your dvd/blue ray sound, next you need to hook up your cable box to the reciever so that you can get broadcast tv sound. hook up the cable box audio to the "tv" stereo analog audio ins, and hook the video to the corresponding "tv" video component inputs.

the component video inputs have separate jacks for red, green and blue ( labeled "Y" "Pb" and "Pr") and are capable of carrying a 1080p full hd signal. use the component video outputs on the reciever to output the video signal to a component video input on the tv, using the receiver's input selector to change the video source.

Try changing from surround sound to normal

please rate my help++++Thanks for using FIXYA

Progressive scan video output would be available on Component Video terminals of dvd player so set connections between TV and dvd player via Component Video cable.
Please intimate model and brand of product that you need instruction manual.
Thanks.

does your dvr have componet video connections

just hook the parking brake wire to the ground wire on the radio.

It sounds like she has the player set to output 5.1 surround sound, but only has left and right channel speakers hooked up. Either change the dvd player to only send two channels or hook up a center channel speaker.

Go to sound menu of dvd player and select Stereo sound and if surround is enabled, disable it.
You can get help from user manual of dvd player.

Set sound properties to Stereo by going in to menu of dvd player as it seems its set on AC3 or Dolby Surround some thing.
Need further help, let me know.

I need a Manual for a Sharp Dv-nc70 - combination VCR/DVD player. I have just moved countries and can't find it anywhere, I can't get sound on my tv when I hook up the VCR part
Thanks!