Question about Televison & Video

1 Answer

I want to fix my lg tv to a bracket but I don't know what screw/ bolts i can use and fix the bracket to the back of the tv thanks.

Posted by chris on

Ad

1 Answer

bobby caesar

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 247 Answers

The screws are philips round head type fine thread u will need to go to a tv bracket dealer shop specify the size of the tv and u will be sold the bracket which comes with the standard screws for mounting

Posted on Jul 11, 2013

  • chris Jul 11, 2013

    No I already have a bracket , it's a TV set with a bracket, but I haven't got the screws, I just need four screws to screw the bracket to my tv, it's not a wall bracket, it's table standing

×

Ad

5 Related Answers

Anonymous

  • 476 Answers

SOURCE: vesa screw holes

Most wall brackets are universal for a particular vesa standard, in this case 100mm x 200mm.

This means that the bolts supplied aren't for any particular set.

The Philips 26PF5521D only needs bolts up to about 12mm long.

Try shorter bolts.

Posted on Feb 22, 2008

Ad
budmrtn

Bud Martin

  • 11361 Answers

SOURCE: screw size to bolt panasonic 32 inch lcd into

Metric M5 or M6, they should come with the mounting kit.

Posted on Dec 23, 2009

Luis Rodriguez

  • 36 Answers

SOURCE: No screws in back of tv

No, the screws comes with the universal mount/ bracket sold separately.

Posted on Jan 13, 2010

vacman66

  • 26 Answers

SOURCE: mounting it to a tv stand

Use the upper holes. Should be either a 100 x 100 mm (4" x 4") or 200 x 200 mm (8" x 8") or 100 x 200 (4" x 8") on this size television. Most mounts show the mm spacing, so purchase a mount that works with your spacing.

Posted on Jul 06, 2010

Rocky

  • 302 Answers

SOURCE: My 37" lg hdtv lcd

Their are a lot of things that could be wrong with your TV. The most commond would be your power supply or your signal board. If you look at your power supply carefully, You might see some capacitors that look like they blow up. If that's the case then replaceing them might fix your problem if not then you might have to get a whole power supply. You can get parts for this TV at www.interliquidparts.com

Posted on Jun 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wall mount Sanyo LCD-32xr8DA


look at the middle of the tv the 4 screw mount thats wre the tv wall mount gos. good luck

Jun 15, 2013 | Televison & Video

1 Answer

I how a 60 inch tv that need screws for the base but don't know what size screws


CALL LG CUSTOMER SERVICE AND THEN GO TO HOME DEPOT ETC.

THEY ARE GOING TO BE STANDARD BOLTS.

Apr 16, 2012 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

How to replace front discs and pads


Front brakes are very simple to do:
  • Pull off the front tires.
  • Remove the brake pads by removing the slide pin bolts where the piston assembly attaches to the caliper mounting bracket. The slide pin bolts are usually a 12 or 14mm bolt. Once the piston assembly is free slide the old brake pads out.
  • Compress the piston back into the caliper by using a large pair of channel lock pliers or a c-clamp. If you don't do this, you won't be able to get the new pads on.
  • Before you put the new pads on, replace the rotor.
  • Remove the two bolts for the caliper mounting bracket. They are in the back and are bigger than the slide pin bolts. Usually a 17 or 19mm bolt.
  • Pull off the caliper mounting bracket.
  • At this point the old rotor should slide right off. If it doesn't slide right off, look for a screw in the center of the rotor, some cars will have a screw there to hold the rotor on. If there's no screw and it still won't come off, try tapping it with a hammer. If you're replacing the rotor, don't be shy.
  • Put the new rotor on. Make sure to clean off any grease with brake cleaner that may be on the braking surface from packaging.
  • Put the caliper mounting bracket back on.
  • Put the new brake pads on. Make sure to use some anti-squeal grease on the back of the pads.
  • Put the caliper assembly back on with the slide pins. Grease up the slide pins as well.
  • Put the wheels back on.
  • Make sure to pump your brakes 10 - 15 times before you drive off. Because you compressed the piston back into the caliper, the piston will not be contacting the brake pads unless you pump the brakes.

Good Luck!
~Brandon

May 27, 2011 | 2002 Mitsubishi Lancer

1 Answer

Want to mount tv lg 42lg50 42 in. on wall...which screws you use for drywall


You don't use screws for drywall to hang a TV, EVER.  That's a 50 pound TV.  You should only use the heavy stud bolts that came with mounting bracket and bolt them directly into the studs.  If by some chance the mounting didn't come with them, go to Home Depot or Lowes with the mounting tell them what you're doing and they'll get you what you need.  You are using a mounting bracket, aren't you? If by some chance you're trying to do this without a mounting bracket, STOP what you're doing and get a mounting bracket appropriate for your size television.  Go to Monoprice, they're the cheapest and their quality is excellent.  Meritline is good as well, they just take a little longer to get.  See the video below.

utube.png You-Tube video "lCNyc-KgCDY" placeholder [unremark-end]-->(do not delete) utube.png

http://www.monoprice.com/products/subdepartment.asp?c_id=109&cp_id=10828
http://www.meritline.com/tv-wall-mount---c-13552.aspx

Apr 22, 2011 | LG 42LG50 42 in. LCD HDTV

2 Answers

Haier HLP21E belt broke. My machine was overloaded. How do I replace it?


put new belt on big pulley first then roll in over on smaller one

Mar 29, 2010 | Haier HLP21E Top Load Washer

1 Answer

Belt broke...need to know how to open the back


to fix the belt you open the FRONT. I just did this today! Unscrew the dryer vent. Then, with a screw driver, pop the front of the TOP. Then, there are 2 screws with bolt heads... one on each side. 8mm. take those off. pop the front off by lifting up on the whole front panel, as it rests on two brackets.

Jan 25, 2010 | LG Dryers

1 Answer

What specification of bolt is needed to mount the LG 42LB1DR using a VESA wall mount? Thank you.


It can be METRIC M5 or M6, when you buy wall mount brackrt, the kit will come with mounting screws to attach the TV to the brackets.

Dec 10, 2009 | LG 42LB1DRA 42 in. LCD Television

1 Answer

Vesa screw holes


Most wall brackets are universal for a particular vesa standard, in this case 100mm x 200mm.

This means that the bolts supplied aren't for any particular set.

The Philips 26PF5521D only needs bolts up to about 12mm long.

Try shorter bolts.

Sep 27, 2007 | Philips 26PF5521D 26 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6131 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...