Ctd sensor error

It is an error code that is a common technical error that manifests due to poor quality prints and smudged color. It generally indicates that the printer firmware is outdated or the CTD sensor is not clean.Jan 27, 2021

Steps to Fix Dell Printer Error 009-654 - Tech Support Expert

https://techsupportexpert.com > Blog

Solved: DELL C1760NW ERROR CODE 009-654 - Printers

https://www.dell.com > community > Printers > td-p
Thank you for reaching out to us. The error code shows that there is an issue with the printer ADC sensor. If you have already restarted printer multiple times ...

• 
  

  CTD ( ADC ) Sensor Error on the E525w Dell Color Laser Printer

  https://www.dell.com > ... > Knowledge Base Article
  Feb 24, 2021 - Turn the power off to the printer and unplug from the wall outlet. · Power the printer back on. If the error still occurs continue to set 3.
• 
  

  C1765NFW Error Code 009-654 - Printers - Dell

  https://www.dell.com > community > Printers > td-p
  Apr 16, 2018 - Hi I have a Dell C1765nfw printer, was working fine, suddenly stopped working after giving a few "faint" pages..giving me an error 009-654,

092-651 092-651 Restart Printer Contact Support If Message Returns CTD (ADC) sensor error

The CTD Unit is a Sensor on or near the Transfer Belt Unit on your Dell Laser Printer. This error is advising that the sensor is dirty and may need cleaned. If you receive one of these errors please clean the CTD Sensor on the Printer.

Open up the side panel that houses the toner cartridges. One by one pull out the toner cartridges, with a clean dry cloth clean off the injection port(?) on the cartridge and the injection port on the printer(this will be just inside the where the cartridge locks in. Sometimes these ports get clogged with toner and need a good cleaning, causing a CTD sensor error. Our 6128mfp does this error all the time and we have not had to purchase the new parts to fix the error.

The CTD Unit is a Sensor on or near the Transfer Belt Unit on your Dell Laser Printer. This error is advising that the sensor is dirty and may need cleaned.

If you receive one of these errors please clean the CTD Sensor on the Printer.

1. CBR Tech Solutions orhttp://www.cbrtechsolutions.com

My printer is not new, but I just replaced the PHD unit and received the same error. To fix it I had to clean the CTD sensor.

This link explains how to do that:
http://support.dell.com/support/edocs/systems/PRN2135CN/en/ug/sectiofv.htm#wp1182758

Hi. Easy! Open the front cover and you will see two stickers with red borders in front of you. About 10mm above them is the sensor - dust it with a cotton bud or tissue.
Simples!

If it's not blinking it one of: The PHD (Print Head Device), or belt unit, life is coming to an end. Clean the CTD sensor. Try to clean the CTD sensor with a dry cotton swab. The sensor is located on the front cover (inside).

I've included a link below to the manual for your printer. Please follow the instructions listed under "Cleaning the Automatic Density Control (CTD) Sensor".


http://support.dell.com/support/edocs/systems/5100cn/en/UG/section21.html#1097283