My psps sounds been working fine untill a few days ago. now my sound will work for a minute or two then ill lose sound for three to four minutes and so on ive checked the sound settings and all of them seem fine the sound on/off button turns the the sound back on for a couple seconds but after that i turns back off this is especially stressfull because i use alot of shooting games and i constantly die not knowing im being shot =(
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not likely a grounding problem. Run a test: Turn on unit with NO sound into the mics and wait 5 minutes... now try the mics. If they start working for a few minutes, then the amp is being overdriven. These small systems can be overheated and a thermal protector shuts them down to protect them. A hidden problem is if the mics are in front of the speakers you MIGHT have ultrasonic (above hearing range) feedback that may be overheating the unit. Put your speakers nearer the audience and mics behind. If problem persists, exercise your warranty.
I realized that there is a 90 day warrantee on parts and a 30 day limited warrantee on labor for the repairs that were done. As I stated, the original problem was the picture shrinking after a few minutes of the set being on. The repair firm took my control board with them. When they came back to install the repaired control board in my set there was a load spark during the installation, after which I had a black screen and no sound. The repair firm took my set them and installed a "CAP Kit", a STRM6511, and a "D1881". The set worked perfectly until two days ago.
I called the repair firm an they are coming out this Thursday to check out my TV. I am hoping the problem is related to the failure of one of the parts installed to fix a similar problem which occurred after the sparking incident.