Cannot program intec xbox360 remote: 1. Do not have program codes for Philips Projector Flat screen. 2. Do not know how to use scan programming. If anyone knows one or the other I would appreciate the help. Thank you

First I'm not a Philips tech.

This link may help. I believe there are instructions too. You can tell the model by pictures.

https://www.directutor.com/philips-universal-remote-codes

Aloha, ukeboy57

How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/

Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/

Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

tap it into google, you should get the hit you want, good luck!

http://www.sanyotv.com/RMT-U230%20(E)%200136A-.pdf


See Owners Manual for your remote at above link for your Philips TV codes and programming instructions.

Please comment back if this was helpful.

If you have not found the codes yet, follow the link below. The link will walk you through the steps to program the remote to the tv. They are simple steps.
Codes:
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

If the codes do not work, try this link for a power scan, which will scan the tv for the correct code.
http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

Turn TV on, press and hold CODE SEARCH button until light comes on, press TV, the light will blink and remain on, enter the code, the light will go off, press POWER untill TV goes off....hope this was helpful...

Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

hi i have a philips universal a rca tv and a dvd named lennox sound 2003 i want to program the dvd with the remote please help no codes lost

lost my manual , just want to know how to set the remote control , i do have the codes