Question about Stanley Utility Knife

Open Question

Stanley 10-480 how to reload the blades on a Stanley utility knife model 10-480

Posted by Anonymous on

Ad

5 Related Answers

mark24354

Mark T

  • 776 Answers

SOURCE: WAS ABLE TO OPEN THE STANLEY SWIVEL LOCK UTILITY

If you use the wrong brand of blades, they won't let the knife shut all the way. The notch is cut slightly differently. The same is true for the Kobalt knife I just bought at Lowes. Get the Stanley blades that are right next to the knives - they are the only ones that work.

Sorry.

If you bought the Stanley blades, then I don't know what the problem is. Sorry for that too.

Posted on Nov 20, 2009

Ad

ADRIAN

  • 313 Answers

SOURCE: How do you load a new blade?

At the back end of the knive (the curved end) press the black piece through the yellow rounded part and the yellow front and the black back will part, now slide the yellow part back to reviel the blade folder. Fit new blade then refit the yellow part on top of the black part and slide the yellow part foward to lock it back in.

Posted on Jul 31, 2010

Ad
puertobori

Doctor PC

  • 7733 Answers

SOURCE: Just purchased a Stanley fatMax

Some models has 2 screws on the knife case.unscrew them and you can access to the blade.

Posted on Nov 08, 2010

lstimo

  • 27 Answers

SOURCE: I cannot figure out how to put a blade in my

at the handel end it will pull apartthen slide the whats left of the old blade and put new won in its place just do it slowly so you dont forget how it goes

Posted on Apr 21, 2011

Jeff Harris

  • 81 Answers

SOURCE: Have a Stanley Fat MAx

there is a little black button on the end where the blade comes out. With the blade in the out position,push in the button and pull out the blade. With button pushed insert new blade or turn the old one around to use the other end.let go of the button and you are ready to go.

Posted on Jun 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a stanley fatmax knife but it doesn't have the small yellow button to help insert a new blade. what can I do?


HI!Kindly pull the button on the end of the knife and then after you remove that you can now put the blade of your knife.

Aug 21, 2011 | Stanley Utility Knife

1 Answer

Have a Stanley Fat MAx utility knife and unable to open it to load the blade


there is a little black button on the end where the blade comes out. With the blade in the out position,push in the button and pull out the blade. With button pushed insert new blade or turn the old one around to use the other end.let go of the button and you are ready to go.

Jun 26, 2011 | Stanley Utility Knife

1 Answer

Can't reload utillity knife fat max10-778


Hi Mark,

I have several of them. Are you having trouble getting the handle to open up?

I have found that the blade needs to be all the way in to open it. Also, to get the blade holder to sit right.

If this is not the problem, please reply back. Thanks,
Handie Andie

Jun 21, 2011 | Stanley Hand Tools

2 Answers

I cannot figure out how to put a blade in my Stanley FatMax fixed blade utility knife. There are no instructions with the knife.


at the handel end it will pull apartthen slide the whats left of the old blade and put new won in its place just do it slowly so you dont forget how it goes

Apr 21, 2011 | Stanley Utility Knife

1 Answer

Describe how you put a blade in FatMax model 10-778


The model in your picture is a fixed blade utility knife (model 10-816). Your question asks for instructions for model 10-778, which is a retractable knife. I'll guide you through the 10-778 which you asked for, if you need instructions for the pictured 10-816 please re-post the question.

Push the thumb slide forward as far as it goes exposing the blade. Press the blade change button on the side of the knife (the small button on the left side near the blade) and pull out the old blade.
Insert the new blade and slide thumb slide back to fully engage blade in the internal lock.

Dec 26, 2010 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

Cant put the thing back together after putting in new blade !!!fat max knife


some stanley knifes require stanley blades only, or make sure the clip blade is in is seated in the grove completely.

Dec 23, 2010 | Stanley Fatmax Xtreme Retractable Utility...

3 Answers

Stanley 10-801 utility knife. How do you change the replaceble blade?


On the pivot end of the bladed knife is a black plug that says pull. They actually mean "Push". push it away from the knife body and rotate the handle half it's mounted in, down. The body will rotate in half , revealing the utility blade and more blades in the rear storage.Also note the blade depth adjustment has a locking detent. You have to push it to the right to unlock the utility blade.and push it to the right when retracting to fully retract and lock the utility blade.

Nov 26, 2010 | Stanley Garden

1 Answer

WAS ABLE TO OPEN THE STANLEY SWIVEL LOCK UTILITY KNIFE AND REMOVE DULL BLADE. NOW i CAN'T GET THE NEW BLADE IN AND CLOSE THE KNIFE PROPERLY, WHAT'S THE TRICK?


If you use the wrong brand of blades, they won't let the knife shut all the way. The notch is cut slightly differently. The same is true for the Kobalt knife I just bought at Lowes. Get the Stanley blades that are right next to the knives - they are the only ones that work.

Sorry.

If you bought the Stanley blades, then I don't know what the problem is. Sorry for that too.

Nov 20, 2009 | Stanley Swivel - Lock Fixed - Blade...

Not finding what you are looking for?
Stanley  Utility Knife  Logo

Related Topics:

1,406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Cutter Tools Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

210 Answers

JOHN LAPIER

Level 3 Expert

2601 Answers

Are you a Stanley Cutter Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...