I have a great picture but for some reason, after watching the television set in the morning and then turning it off for the day, I turned it on in the evening and had absolutely no sound. I have disconnected and reconnected everything including the power and still have nothing. My TV set is over three years old.
I had the same problem. Do you have a cable box for digital TV?
do you have a remote from the cable company? that is programmed to control the TV?
get the cable company to unlock the sound control from it (a 3 number code)
put your sound up to maximum if you can
if you hear faint sound repeat above
you should be able to hear the tv then
then go to the sound settings and adjust as needed
get the cable company to check the box in cas it has been zapped by lighting
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you pull the stem out all the way (two clicks) it should set the time. Pulling the stem out one click you noticed sets the date, you turn it one way for the date and in the same postion you turn it the other way for the day. For some reason on some watches the day will stick, if that still happens you will need to turn the hands around and around until you get to the right day, then keeping in mind the 12 hour interval you are in... set the date and time. If the day still does not change then you need to return the watch if its new or send it to timex! Caution: when sending a watch to Timex sometimes they send back a different watch without asking so if its sentimental do NOT send it to Timex!! Hope this helps! have a great day!