Question about Televison & Video

4 Answers

Sony Trinitron kv-32fq75b

When I switch on my TV I get about 2 seconds of sound and then the tv goes into stnad-by mode with the red led flashing. Anyone got any ideas.....

Posted by germc on

  • 2 more comments 
  • Jedwa Nov 03, 2007

    Our Sony Trinitron has a little different problem. No sound comes on before it goes into stand-by mode. It started about 6 weeks ago. At that time , we unplugged it for 2 days, tried to turn it on, and it came back on. We just let stay on 24/7 after that. This last week, I was sitting at home watching it, I accidently hit the power button, I guess. It went off and has not come back on, even though we tried the same procedure.

  • Anonymous May 23, 2008

    While watching a movie our Sony KV-27V65 went blank with no sound, the standby indicator started blinking......the Tv has remained in this state ever since.


  • Anonymous Aug 26, 2008

    I'm having the same issue my tv stopped working and the standby light flashes. But if I unplug the tv for a few days then plug in back up it works for maybe a day or two please help!!

  • ericibarajas Oct 15, 2008

    So I have a Sony Trinitron and just a couple of days ago, the sound went out while I was watching TV. It was connected to speakers so I unhooked those and tried with just the regular TV speakers but no luck. Any suggestions on how to fix it. Thanks



4 Answers


Buy a new tv

Posted on Jun 26, 2008


Mark Moore

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hi Don't know if you have solved this or not, but when you get the 2 seconds of sound do you have any picture? Its been my experience in working on these types of sony's that what your describing with the flashing light is more than just a cable connection problem, usually a High Voltage or Power Supply problem, and the shut down circuit is kicking in giving you a flashing light to indicate this, definitely a problem for a certified tv tech to fix. Mark

Posted on Oct 07, 2007



Your h out stage is shorted fbt this job is better left to a sony service centre after the parts are fitted it needs a special setup

Posted on Aug 30, 2007


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

Sounds like the either the connection from the cable/sat box is loose or the board connecting the cables to the tv is loose. If you try unplugging and then reconnecting the cables and hold the cables in tight that might give you and idea. If you hold the cables in tight and the tv works right, then you know its your board. If thats the case the Tv needs to be serviced. Otherwise you might try using some other cables.

Posted on Aug 26, 2007

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I have sony 29'' crt tv . model no KV-DZM61 .when the tv statrs on it shows green led,and after few second the led glows red and it blinked for 2 times .then the tv goes in stand by mode

2 blinks means - over current protection (OCP) , unit goes to the standby
mode then displays the 2 blink fault. Could be a short in the power supply of
any of the circuits.

Sony Trinitron Wega KV-27FS100 picture on and off

i'd say your tv is unhappy.

unplug for 10 min..and see if that resets it.

I have " Sony FD Trinitron WEGA KV-36HS420 36" TV

U have a soldering iron,desoldering pump or a roll of desoldering braids,a roll of solders?Can u do basic soldering and uderstand basic electronic?FBT- the flyback transformer,the big black block of a plastic with a red wire with a cap hook to a CRT-tv picture tube.Near the big block of a plastic with a red wire with a cap hook to a CRT picture tube.Inside to the right of the FBT,there are 2 power supply ICS,those 2 ICS are dead.Replaced these 2 power supply ICS near the FBT,will solved this tv LED power light indication blinking and will have stable tv power again,and tv will work.

Sony FD Trinitron WEGA Tv - LAMP blinking 11 times

Sony tv has self protection program. The red Led blinking light indicate the probable cause location. For this model it is either 2,4 or 5 flashes every 3 second. Please check the blinking again

Sony Wega KV-XF21M83 21" Color TV red LED flashing two times

mt sony trinitron power light is blinking from green to red twise and then pause for 3 seconds and then blinks again from green to red

Picture tube not working

Please provide more info.
1. Does the TV stay on, if so,
2. Is the LED flashing, how many times stop same number of times again
3. If TV goes to stanby, count the flashing LED.
4. If LED comes on goes off , at firsdt switch on. does it make a thumping noise.

Standby indicator light on TV flashes - Sony TV

    Please check fisrst that indicator liight (LED) blinks how many could be from 1 to 8 times and the interval would be of three seconds.So, count the led flashes how many times and then tell me i will try my best to find and fix the solution.


Sony Trinitron KV-32FS12

i think your tv had a lose contact or crack on board

Sony FD Trinitron WEGA Tv KV32FQ86E two flashing led

Check 470 uF 450 V in the power supply. I don't know if the chassis is the AE-5, but I had a similar case and the capacitor was bad.

Please tell me if it worked.

e-mail: [email protected]
Not finding what you are looking for?
Televison & Video Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

Cindy Wells

Level 3 Expert

6278 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides