Unable to load video to imac

www.monoprice.com

You can download the manual and more from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/camcorders/flash_memory_camcorders/fs100#BrochuresAndManuals


http://www.usa.canon.com/cusa/support/
consumer/camcorders/flash_memory_camcorders/
fs100#BrochuresAndManuals

Use your flash drive and just drag and drop. Plug it into either a port on your computer or on your printer. Open windows explorer to cut and paste your video and photo files from the flash drive.

The computer is no longer detecting the camcorder for several reasons. It could be the ports on the computer, it could be the cable that you're using to connect the camcorder to the iMac, or it could be the camcorder itself.

Try connecting the camcorder into different USB or FireWire port of the iMac.

Try using different cable.

Try connecting the camcorder into different computer to test the device.

If all else fails, power cycle the camcorder by turning it off and remove the battery for about 10 minutes. Then turn it back on. Otherwise, contact the manufacturer for second opinion.

Hope these helps and have a great day!

THE SERIAL NUMBER OF MY CANNON FS 100 IS NOT ACCEPTED

contact me

USB bad. If the footage is on hard drive rather than tape just browse the camera or import rather than capture. If difficulties seeing the hd maybe use a card reader known to work with mac. If it is on DV tape you need to connect to a dv / hdv out to fire wire, if this camera doesn't have one you will need to borrow some one's who does.

http://onlinevideodownloader.net/save-canon-fs100-video-on-ipod.html
I believe this post will offer you an excellent answer.
hope it can help you more or less!

I experienced the same thing. The compact power adapter is simply the power cord used also to recharge the camcorder. Plug it into the wall at the same time as you have the USB plugged into the computer and it should be able to download.

jhobby2000 buy a usb 2.0 specially for SD or SDHC chip