Question about D-Link DI-634M Wireless Router (DI634M)

1 Answer

My D-Link DI-634M wireless Router never worked

I am from Aruba. I bought this wireless router months ago. But because I didn't use it right away, I can't change it. I do everything exactly as the description, but than I get to a part where I have to reset the router, because something is wrong with it. I can't reset it, the way the description says. Can someone help me how I have to reset it? Thank you!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi, Like most router products, the reset is at the rear near the power jack connector. You have to use a straightened metal paper clip to press on the hole to access the small push button underneath. Do this with the power connected. Press for a couple of seconds or till the leds blink. Once done, the unit will be set to factory default settings and you will have to configure it again. If this does not work, perhaps you have tried to update the firmware which: a. did not finish; b. was not successful or c; got corrupted. The only recourse for a router with faulty firmware is get RMA & replacement from D-Link. Post back should you need additional information. Good luck and kind regards.

Posted on Aug 26, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you set up a zte720 wireless home phone to a Motorola NVG589 U Verse wireless router for Boardband service?


There is no port for broadband(RJ45) output in ZTE720 so if your phone line terminates at ZTE720 then Motorola cannot be connected to it.
On the other hand if you terminate the your phone connection at Motorola NVG589 then you will get broadband and no output to connect to a phone line.
However there is a way and that is the phone line coming to your home can be connected to a splitter (it has one input and 2 outputs, one for phone(ZTE720) and other for router(MotorolaNVG589)).
Splitter will provide output for both devices and they can work simultaneously.

Your connection.
Phone line coming from outside-----splitter------ZTEwirelessphone
'
Motorola ADSL2+ router

http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/26009/1/Motorola%20NVG589%20VDSL2%20Gateway.pdf

Jul 25, 2014 | Computers & Internet

2 Answers

Frequent loss of internet connection


CONTINUAL DISCONNECTION OF WIRELESS CONNECTION
There are a few things that can cause you to lose wireless connection with your wireless router. 1. Weak signal strength, check the signal strength on your wireless card. If it is weak move the wireless router away from brick or concrete walls and if possible locate the wireless router higher up. 2. Have you secured your wireless router from people near your from unauthorized access? i.e. change the default password, setup encryption use WPA2 or WPA, change the default SSID, and turn off SSID broadcast, and for added protection, enable MAC address filtering which allows only the MAC address/es of your wireless card/s to connect to your wireless router. 3. You could be getting interference from electrical sources such as air conditioners, arc welders, washing machines etc. If so, the power supply to the wireless routers and computers etc should be connected to a surge protection power board, better still connect your computer equipment to an UPS (Uninterrupted Power Supply). 4. Check the channels of the wireless routers and access points in your area and change the broadcast channel on your wireless router to an unused channel or one that is currently used but has the weakest signal strength. This will minimize interference with your wireless router from other wireless routers and access points in your area.

Sep 01, 2012 | Belkin Share N300 Wireless Router

1 Answer

My linksys router doesnt have a default gateway and the reset buttton on the router doesnt work either


When you look between the Ethernet port and Power button, there should be a reset button there you should hold for 5 seconds. Of course if you do that, If you changed Network name and key that will be reset to the default settings, Also is wireless network showing when you pull up the Networks? You can leave user name blank, but default password is admin. Also email me with more info I will be glad to help
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=1e97db4854604b0fb5cc8c0d74491e35_19584.xml

Dec 26, 2011 | Linksys WRT54G3G Wireless Router...

1 Answer

Packard bell - wont recognise wireless adapter


i have the same problem, mine wont even recognise the adapter at times.

Dec 14, 2011 | Packard Bell Computers & Internet

1 Answer

Syncmaster 2033SW Monitor: I bought my samsung 2033 a month ago. It recently ...


I would take it back right away, when electronics break down in lees than 6 months it is not a good sign. Get the replacement or have it fixed under warranty.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

May 18, 2010 | Samsung Syncmaster 2033SW Monitor

1 Answer

Not getting wireless connection


Unfortunately Not All the details are not given in this
Any way

Try This

Open RSP By typing 192.168.2.1 on the Address Bar of Internet Explorer

On the Left hand side underneath Wireless Click Wi Fi Protected Setup

Leave the Password Blank and click Submit

Disable it And Apply Changes

Jan 06, 2010 | Belkin F5D8236-4 Router

1 Answer

Bought a NetGear WPN111 RangeMax Wireless USB 2.0 Adapter a few months ago. It was working fine up until a few days ago. It started dropping my internet connection, and now it won't even detect any...


Hi
firstly you can try upgrading the drivers on the adapter. following is the link for the latest drivers http://kb.netgear.com/app/answers/detail/a_id/12520

If the problem still persists
try changing the wireless settings on the wireless router.

Nov 12, 2009 | NetGear WPN111 RangeMax Wireless USB 2.0...

1 Answer

No CD, no instruction, not very good with computer, pls help


Since you don't have the setup CD of the router the only way to make everything work here is to manually reconfigure the router by accessing its setup page that is inside the router where you can do and reconfigure the router back and if you're not aware on how to do that you can contact Linksys tech support to walk you through with the process they are open 24/7 this is the number 800-326-7114 call them anytime....

Oct 21, 2008 | Linksys WRT160N Wireless Router

2 Answers

Lost connection on laptop


I would reset the router most of those linksys will have a small hole in the back of them that say reset push it and let it go back to factory default see it that does not fix your prob

May 10, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
D-Link DI-634M Wireless Router (DI634M) Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...