Rav311 cannot setup to control my cable box as i cannot get the code

Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762

SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control

Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4

0382,0388 are the commonly used codes for Yamaha AV receivers. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

296,299,294. Try these codes. If you wish to get more codes and other details. It has setup code list, and setup procedure to many popular brand remote controls.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

2897,2891,2889,2884. If you wish to get more codes and other details. It has setup code list, and setup procedure to many popular brand remote controls.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

You should set the remote control with your TV too, with the setup code to your TV brand. Find it from the remote control's code list, and set it up with. For more information check this link. Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts.

Dear Sir:

Please go the next web page:

www. fitness.manualsonline.com give your model, etc and download for free, and ready.

However if your HTR amp does not turn off or on the amp can be faulty the sensor of the amp.

sincerely.God bless you.

ernesto cuadra
managua, nicaragua. c.a.

hello!
refer to your TVs owners manual. You will find codes for common set top boxes there. all the new TV remotes are universal. If you see "cable" or "cbl" button on remote, you will be able to do so. Worst case scenario: you need to buy universal remote or use your cable box's remote to control basic functions on TV. Codes for TVs are included with cable box's remote control. Or, you can call your provider and ask for "Sony Bravia"codes. If you have a satellite box, codes are supplied right inside "setup" menu of the box.
Good luck,
Alex.

i better suggest that you buy a universal remote that supports Rav312 rather than buying a Rav311, coz sometyms there are instances that even they look exactly the same the programs of each buttons are different unless they have the same chipboard. So, to play safe go for a universal remote that supports Rav312. hope that it helps.

what is the brand of cable box?

Here's all the JVC codes I could find, good chance one of them will at least work the basic functions:
0017, 0018, 0019, 0108, 0136, 0153, 0178, 0190, 0213, 0218, 1000, 1001, 1007, 1011, 1017, 1036, 1043, 2033, 2045, 2053, 2070, 2073, 2099, 2126, 2127

Hope this helps.