How can I use Ezonics EZCom USB for Window XP homeedition network.
1st You download Webcam Driver.
Ezonics driver
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Posted on Nov 16, 2013
Sdfsf
Posted on Feb 13, 2008
Get the required third party drivers from :
http://main.ezonics.com/Walkthrough/Ezcamusb/Ezusb_02XP_walk.htm
As mentioned on the site, Ezonics Corp. is not providing any support for such drivers. Users assume full responsibility when installing and using these drivers.
Best of Luck,
rajesh_im
Posted on Feb 13, 2008
175 views
Usually answered in minutes!
×