Question about GE Profile Spectra JGBP90 Gas Kitchen Range

Ge xl44 oven top

How do I get the oven top to come up is there a switch or something?

1 Answer

Franklin Ouchida

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Master
725 Answers

There is two rangetop clips in front that hold it down.. you a putty knife or flat screwdriver to push them in and pull up. let me know ..

Posted on Aug 25, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

2 Answers

My ge xl44 oven will not turn on. There is no gas smell or sounds coming from oven. Burners are working fine. Any suggestions?

I have the same problem. Worked fine last night - now nothing from the stove but the top works fine.

Nov 15, 2010 | GE Kitchen Appliances - Others

1 Answer

Xl44 GE GAS RANGE OVEN WONT WORK, RED LIGHT IN

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter

heatman101

czvb

May 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 Oven and stovetop work - broiler does not work

The broiler is the top element in the oven. Look at it. Bad ones sometimes have burnt into or have a melted spot. If it looks ok take it out by removing the screws at the back and pull the wires out a little and unplug the element. With an ohm meter it should show continuity. Replace it if any of these things apply.

Feb 04, 2010 | GE Kitchen Ranges

1 Answer

GE XL44 oven won't turn off. Knob off and pin is loose

My GE XL44 oven would not shut off and it turned out to be a worn out thermostat for the oven. I have written up a step-by-step tutorial on how to replace the thermostat on my blog: John Fixes Stuff GE XL44 Oven Will Not Turn Off How To Replace Oven...

Jan 17, 2010 | GE Kitchen Ranges

1 Answer

GE Spectra XL44 burned cabinets during self cleaning

the gasket or seal is likely gone ...replace

Jul 24, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE Spectra XL44 Gas Kitchen Range - suddenly only top works

where do I find the pilot light?

Jun 29, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 propane to natural gas conversion.

Hi, You will need to use a 1/2" wrench and turn the orfice for the oven 2 turns counter clockwise.
Make sure you flip the plunger over on the regulator also.
After doing these things, watch the flame in the oven to make sure no other adjustment is needed.
Please let me know if this helps or if I can assist you further.

Vic

May 27, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 gas range, oven dial doesn't have "lite"?

Set the oven for the desired temperature. It will cycle on and off at that temperature.
It will lite automatically.

Feb 27, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE spectra xl44 - Oven not working, broiler & stove-top burners fine

replace the ignitor for the oven. it's the lower one and not the one on top.

Oct 28, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Top works bottom doesn't

I have XL44 oven JGBP26. I replaced the glow ignitore on the oven but still will not glow. I carfully tested the current to the ignitore and showed 125 volts, I also tested the resistance on the control valve lead and to ignitore and showed 1100.

Dec 15, 2007 | GE JGBP28 Gas Kitchen Range