Question about Hampton Bay AC414-LRU 52'' Kemper Collection Rustic Finish Ceiling Fan
I have a Hampton Bay Clarington 52" ceiling fan 503-837 that I just installed. It comes with the optional remote. The fan does not work with the power switch on, only the light comes on. When the light switch is off it operates but on the light/dimmer option of the remote instead of the fans off and on, low, med, and high. Before I installed the fan I changed the light switch which was working fine with a regular two wire light fixture. Any advise woudl be appreciated before I begin dismantling the whole thing.
SOURCE: Hampton Bay Ceiling Fan - Clarington 503837 52"
It slides in above right above the ball, in the mounting bracket where the canopy is. You may have to kind of encourage it to go in there, and you will need to push wiring off to the sides and out of the way to help it have clearance to get in there.
Posted on Apr 15, 2008
SOURCE: remote controlled ceiling fan
unplug the fan then remove the batteries from the remote then plug the fan back in and, reinstall the batteries; this resets the fan control
Posted on Apr 22, 2009
SOURCE: Hampton Bay 52 In. Clarington. How do I reverse the fan?
Try these two: 1) look for a small switch up near the light area on the dark-colored area of the fan. If a switch is there, then simply flip the switch to the other position; 2) if you have a remote control for the fan, the reverse mode may appear on the remote control. Hope this helps.
Posted on May 19, 2009
SOURCE: dimmer to operate a single CREE LR6 LED fixtur
Simply Automated Dimmers drive standard AC loads as low as 1 watt. The work GREAT for CREE LED fixtures.
Posted on May 13, 2010
170 views
Usually answered in minutes!
×