How do I change the display name on the NEC DTerm Series i phone?
I have found a document that explains it but it says I need a ''Name Assignment Access Code'', what is this and how do I find out what it is? I tried the extension of the phone but it just gave me a busy signal.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to do this from the Admin phones, by default the lowest ext #'s on the system. This is system programming not the phone itself. Refer to the Attendant guide for the phone system model your phones run on.
Assuming you are not an NEC trained Tech and your system is on a IPKII, You will best served by acquiring the IPKII Instalation manual and the Feature and services Manual.
This is not the kind of simple change that the average end user should attempt although I would agree that it is a feature that should have been made availiable to the average user because of occasional movement in
any office environment.
NAME DISPLAY NOTE: Display Dterm A name with up to 16 characters can be entered to display the name on other Dterm telephones when making a call. • Press Speaker key, Receive dial tone. • Dial the Name Assignment access code and receive special dial tone. • Using the keypad, depress the key with the desired letter to display the first letter on the key. The display will indicate the numerical designation. Subsequent depressions will advance through the letters on that key. The Dial Pad Key TABLE can be used as a guide to indicate the key and the number of depressions required to display numbers, letters, spaces and periods. • When the desired letter is displayed, depression of the Transfer key will change the letter to a lower case letter (default is upper case). Depress the Hold key to enter that letter and advance to the next entry. • Repeat the previous two steps until the desired name is displayed and entered
×