I lost the directions to using my Tomtom One 3. I called Tomtom and they said they would E-mail me the book or what. My e-mail went out and I did not receive it. That was a few week ago. I found somewear that I could get in touch on the e-mail. The clock is still on the old time. I do not know how to program any thing so all i have now is the road I am on.
When you first start using your TomTom ONE , not all the buttons will be shown in the menu. Many buttons and some more advanced features are hidden because you will not need these features very often.To see all of the buttons and features, tap "Show ALL menu options" button in the Preference menu.)
then Tap "Set Clock" button to select the type of clock that is shown and set the time.
manual download go to tomtom website ----> support scroll down at the right hand side click Find downloads look for TomTom ONE 3rd edition click TomTom ONE User Guide
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Setting the clock
To select the type of
clock that is shown and set the time, tap Change preferences
> Set clock.
This feature is only available on your navigation device. You cannot
use this feature in TomTom HOME.
The easiest way to set the time is by tapping the Sync button.
Your navigation device will then take the UTC time and date from GPS
information. Note: You can only use Sync if
you have GPS reception, so you cannot set the clock in this way when you
Adjust the hours depending on your time zone. Your navigation
device works out your time zone and always keeps the time correct using
GPS information. You only need to adjust the daylight-saving time.
Set the clock You must set the clock so that the system announces the correct day and time with any incoming messages. After this, if you subscribe to the caller ID service, the system will update the clock eac h time new call information is received. Press PLAY/STOP to exit at anytime while setting the clock.
1. Press and hold CLOCK until the message window displays C and the default day is announced. 2. To change the day setting, press MEMO/REPEAT or ANNC/SKIP until the correct day is announced. 3. Press CLOCK. The current hour setting is announced. The correct day setting is saved. 4. To change the hour setting, press MEMO/REPEAT or ANNC/SKIP until the correct hour is announced. 5. Press CLOCK. The current minute setting is announced. The correct hour setting is saved. 6. To change the minute setting, press MEMO/REPEAT or ANNC/SKIP until the correct minute setting is announced. 7. Press CLOCK. The cu rrent year is announced. The correct minute setting is saved. 8. To change the year setting, press MEMO/REPEAT or ANNC/SKIP until the corr ect year is announced. 9. Press and release CLOCK. The new day, time and year are announced. The correct year setting is saved. To check the clock, press CLOCK.
For the Sharp SPC374T Atomic Clock - Time Zone setting- Press the 'Time' button once, the time zone will show where 'Day' usually is, use the Up or Down buttong to adjust.
For the outdoor Thermo, credit to my neighbor for this one. Remove battery from main unit, wait 2-3 minutes. Reload batteries. Once you get a reading from the outdoor sensor, hit the reset on the main unit. You will have to reset the time zone as described above, but this worked for me after 10 months of no outside temp showing up!
fROM EXTENSION 300:
Press #TD + Enter time in 24-hour clock using
hours (2 digits), minutes (2 digits) and
seconds (2 digits) + HOLD + Enter date
using month (2 digits), day (2 digits) and
year (4 digits) + HOLD + SPK to exit.
This will change the time on all the phones and voice mail.
If you hold the D button in for 3 seconds then a menu appears. Press the button until the clock setting comes up. Now you use the dial button to set the time. Turn one direction to set the minute and turn the dial in the other direction to set the hour. Hope this helps!