How do you disable DND on NEC Dterm 80 phone WITHOUT DND button

Have a coworker call your extension to see if DND is on, they will go straight to voicemail or get a fast busy. Speaker 42 may be the default cancel DND code, depending on your system and whether the codes were changed. Anyway, ringing is set up in system programming. If someone calls your extension it will likely ring, but outside calls have to be assigned to ring in system programming. Usually need a tech to do the programming since it gets complicated very quickly.

1. Grab an outbound line.

2. On the LCD screen look for ">>>>", press the corresponding button.

3. Keep pressing this until you see "DND" on the screen, press the corresponding button.

If that doesn't work, you need to make sure DND is PROVIDED for this phone. Most likely if you can't turn it off, NOT PROVIDED is selected.

If you have a key system try dialing 42 or 69, If you have a pbx try dialing #8

To here ring types hit speaker then 711, then 1 for internal rings (select 2 for outside ring selection) then 1-8 the ring type.
To set ring type hit speaker then 720 (follow all the steps above).

You can get remote maintenance or tech support very reasonable from ldtsnj.com

I have the 8 button phone and if you hook up your headset the right way you just have to press the line/feature access key all the way to the right instead of picking up the receiver. Keep the headset on all the time and just press that button to answer or hang up the calls. It works great! ( I have the Dterm80 telephone)

press "feature" 69 then press "feature" again ~ problem solved!

For the green light, you can turn it off from DSS. On the bottom left hand side of DSS, it is a message button. You can press the button and then your extension button. The green light will go away from the DSS and on your phone. I hope this helps.

Press feature; press 9; press #; use key pad to change time; press recall to change am/pm; press feature again to when time correct; new time should show.

Another solution is to pick up on intercom and dial 4 then 2 and hang up. That is the default DND cancel code. It can be used form single line phones within the system as well.