Televison & Video Logo

Related Topics:

Question about Panasonic PV-7450 VCR

1 Answer

Visual The sound comes through my TV just fine, but no picture shows up on my screen. It just remains black.

Posted by indubitably on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 254 Answers

First, have you doublechecked the video hookup? It sounds like you are using the video/audio inputs to the TV, so make sure you have VCR video out cabled to TV video input, and the TV source/input selection set to that input (video 1 etc.). If this checks out, check for a dirty video head on the VCR, though a dirty head usually results in a blank or blue video display (older VCRs, snow). You could do a process of elimination by hooking VCR to a different TV and see what is displayed then. Lastly, I assume you've tried multiple tapes, just in case a home recorded tape was incorrectly recorded?

Posted on Aug 27, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Vw42L tv comes on withpicture for 5-10 seconds and screen goes black ,sound is still on

Most likely you either have a defective backlight inverter, bad back lamp. Based off of your model #, I'm gonna lean towards a back lamp.
0helpful
1answer

Have sound but no vision?

When the screen goes black, shine a flashlight on the screen to see if you can see a faint picture. If you can then the ballast board for the backlight is bad. If you can't see a faint picture, then the T-CON board needs replacing. You can get parts from here:
TV Parts Universal TV Stands DLP Chips ShopJimmy
0helpful
1answer

The picture on my TV goes black after few seconds

Hi my name is Roety,
I can help you with your issue ,
Sounds like a lamp going bad
No model listed makes it hard to guess here 
 
 
If I have helped you with your issue
If you have more questions you can still respond
I will reply asap
Thanks

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

0helpful
1answer

When initially turned on TV will alternat between picutre & black

When the tv goes to a black screen does the sound remain on? Also,if you listen carefully can you hear any arcing noises in the back of the tv?
0helpful
2answers

Sony trinitron

check the heater as your tv is ON, there must be a yellow light at the rear of the CRT tube. If the heater is ok then check the IC jungle side. resoldering the leads sometimes will solve. If not refer to your local Tech.
14helpful
2answers

Direct TV DVR sound/no picture or pict. no sound

My Direct TV has no sound or picture but does show channel info at the top. Any help is appreciated.
0helpful
1answer

Sound no picture

Try resoldering the vertical output IC this is acommon problem with this model
2helpful
1answer

Magnavox Mod. # HD 2715 C 202

Your set in in closed caption mode text 1....Go into your menu and un-do the closed caption mode.
Not finding what you are looking for?

144 views

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

The Knight
The Knight

Level 3 Expert

76835 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...