Blade Change Braun KSM2 Coffee Grinder

have you searched for the user manual online or the technical manual for that model ?

braun grinder blade replacement

Yes, unscrew the blade, inspect for any gummy material, hair or any other material that might cause it to slow down, remove it,, and replace the blade. If that doesn't solve the problem, you'll have to diss-assemble the grinder, check the carbon brushes to the motor, to see if they are very worn, replace if necessary and after a complete inspection of the motor, shaft, etc, re-assemble the machine. That should do the trick.

There is no plastic nut, it's all one piece of plastic. You need to replace the blade. If you Google KSM2 replacement blade, you'll see who's selling it. Or if you have small appliance repair shops in your community, they may have it. I just bought one a few days ago.

Try ereplacement.com. There are blades listed for $3.49 but I have never ordered from them.

Krups is among one of the foremost names in coffeemakers, espresso machines, blenders and toaster ovens. Krups also makes coffee bean grinders, such as the Krups 203a. This portable, plug-in grinder has a removable lid and bean grinder chamber. The blade on the Krups bean grinder is fastened to the bottom of the grinder chamber. You may need to replace the blade on your Krups 203. The Krups 203 comes with a limited 1-year warranty, but the company recommends you send your grinder to the company to make repairs. Order replacement parts for your grinder by calling the Krups customer service department at 1-800-526-5377.

1. • 1 Unplug your Krups grinder from the wall.
   • 2 Remove the grinder's lid, and use a cloth to wipe out the inside of the grinder chamber.
   • 3 Put your safety gloves on and then grasp the blade of the grinder with your channel locks.
   • 4 Use the pliers to turn the plastic fastening nut to the left as you continue to hold the blade with the channel locks. Once the plastic nut comes loose, twist it off by hand and remove it, along with the plastic washer beneath it and the old blade.
   • 5 Set the new blade in place, and replace the washer and nut. You will have to hold the new blade in place with the channel locks as you tighten the securing nut.

Things You'll Need

• Cloth
• Safety gloves
• Channel locks
• Pliers

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Unable to find any parts supplier who offered a replacement blade for the CBG5 SmartGrind Coffee grinder, the broken plastic center spindle was reconstructed around the attachment nut, and an epoxy cement was poured around the nut and over the center of the blade.
This solution has worked in testing the blade on the grinder, but how long it will hold up has not yet been determined.
T.B.

There is food grade oils for just your purposed, greases also. Aplliance parts stores carry it

Cuisinart has the part directly- you can order from their website or over the phone.

Insert a small standard screwdriver in the slot in the center of the bottom. Turn the blade slowly until you feel the screwdriver catch in the slot. This holds the motor still so you can simply unscrew the blade counter-clockwise. Do the same to hold the motor from turning while you screw the new blade on clockwise.