Lens When powered on the lens will zoom out a little,the display is blurry and when off the lens is out a bit but still stuck.....

Try cleaning the lens gently with a lens cloth or maybe a damp paper towel? Other than that - you may have something stuck in your lens that is making everything blurry when you zooom in...or the lens may need to be replaced to be fully functional. Do you notice any blurry spots when you zoom out that get bigger when you zoom in? If so something may be stuck in your lens. Good luck!

If the lens is stuck then you can try to rotate it manually a little bit but do not apply force this may damage the lens or else it will be better to take the cam to any shop it is 5 min job.

Chances are your focus is messed up or damage or the lens motor is i would suggest getting a new camera or getting it fixed at a camera store

Yes. But the operative word is "bit." Because of the small sensor size of the P90, you have a short lens. Zoomed all the way out, it's 4.6mm. A 4.6mm lens is going to give you quite a bit of depth-of-field, no matter what aperture you use. Even zoomed in, it's 110.4mm.

Compact cameras simply can't give you narrow depth of field. Not without altering the laws of physics.

Zoom motor in lens assembly is jammed and you need to replace complete lens assembly. DSC-T1 is an old camera so oes not worth to repair.

DON'T TRY TO FIX THIS YOURSELF! You will only add to the damage. If your lens is in warranty, contact Nikon for instructions to get it repaired. If it is out of warranty, I would either pay Nikon for the repair or take it to a camera repair man.

Is there a little lock switch on the lens?? My Nikon lens all have a tiny little lock and if it accidentally gets pushed into lock position it will not zoom. Barry Brown www.coralreefphotos.com

Try these procedures.

i have just had the same problem. mine was stuck open, i gave the lens a slight twist and heard a bit of a crack. i switched it on again, now it is ok.

If the "!ZOOM ERROR" message is displayed on the digital camera, switch the camera off and on again 2 or 3 times.
If this does not clear the error, take the camera to your nearest FUJIFILM Service Station for testing and repairs. Problem may caused by lens zooming gears stuck.