Possible tray stuck, will cause this problem, if you can get the case off, 2 screws on the bottom and 4 or 5 on the back case , if it is jammed the unit will not initialize..I am talking from experience with model and simular models ..I have repaired alot
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You cannot connect it diretly to speaker. It has only preamplifier output for left and right channels, and an optical output to connect it to digital input sources. You must have an amplifier and speaker system to connect it with. It can be any type and brand you like, according to your taste and finacial capacity. Amps can be of cheaper to high quality type. This device can be connected to a digital amplifier, with optical intput, frome which it will convert the signal upto 8 channels or more. But the cost will be sometimes 200 times to the cost of your present device you have revealed here. OK.
this unit needs a new cd mech I have repaired over 100 of this model , RP8075 is another model it uses the same mech part number for the mech is
RCA Part Number: 255908.. if you need help in replacing the mech let me know