Question about GE A730 Digital Camera
If you are using a digital camera on Windows Vista, and have not loaded service pack 1 (available through Microsoft Update) there is a flaw in the Vista operating system that fails to load the basic USB drivers that are used by most digital cameras. In November of 2007, Microsoft released a specific patch to solve this problem, the patch can be found here: http://www.microsoft.com/downloads/details.aspx?FamilyId=51F0EF25-280B-4613-A600-C61224BACD1C&displaylang=en
If you need further help, reach me via phone at https://www.6ya.com/expert/joe_9bb563198cdbfc8e
Posted on May 12, 2009
You at ge for the people who purchsed the a-7;30 digital camera i am sure you have there names andddress,so just send a new up date booklet to us all also tell us how to use the face detection i haveno idea at all, h.polonsky e-mail usa123 las vegas,nv,89130 i am terrible that ge could do this without knowledge.my whole kitchen is loaded with ge producte and if you want to beat hp you must do much better.
Posted on Apr 26, 2008
Has anyone found a fix for this probelm yet? I have the same issue. Thanks.
Posted on Apr 02, 2008
I plugging in the cable from the USB port on the rear of the computer inth the port on the side of the camera. This cable came with the camera.
Posted on Nov 05, 2007
Please tell us what you're plugging the camera into ... Windows computer, Mac, printer, etc.
Posted on Aug 22, 2007
General Imaging finally updated their manual for the A730 which includes more detailed information on USB connections (among other things)
I contacted customer service with respect to a problem I was having transferring pictures via USB. 3 days later they wrote back with an answer that was so stupid I swear they couldn't have read my original question.
I told them that in my reply and never heard from them again. They better get their act together cause bad news travels at eight times the speed of good news and if they're going to offer lousy support, they're not going to be in the digital camera business for long, no matter how good (or in this case bad) their products are.
Here's the link to the latest manual, you may also want to check out their "firmware update" instructions. Good luck
Posted on Feb 02, 2008
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: