- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed Dell monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums Post back what you see inside so we can guide you further and it will help out other people in the future also. http://www.badcaps.net http://en.wikipedia.org/wiki/Capacitor_plague Replacement board:
poginga, Try visit to YOUTUBE for video clips "lcd monitor disassembly" and or "lcd monitor repair" to get basic idea of how to !!! DO NOT USE SHARP BLADED INSTRUMENTS OR YOU WILL END UP IN THE LOCAL "ER" TRYING TO EXPLAIN THE BLOOD GUSHING OUT FROM YOUR BODY" 12fixlouie
CTX 15"1024x768 TFT LCD-Black Monitor · i have a ctx moniter says ... Answer. i have a ctx moniter and wen i plugnitin to pc tower itsays undeceted mode watdoes this mean. Close Close. ASUS Eee PC 1000H
This link, is to the User Manual for the Envision H 819 TFT LCD monitor, http://www.technostation.com/user-guide-owners-manual/Envision/Envision++H819+LCD+Monitor Under the User Manual heading, you will see -> 2009-04-08 12:20:36 To the right of that is -> cache <- in blue. Click on -> cache
The Envision user manual, plainly states that the Envision H 819 monitor, is a TFT monitor. [18.5" (47.0cm) TFT Color LCD Monitor]
Just done mine and the plastic case/frame is secured with clips all the way around. Remove the stand/bracket screws Place the panel on its top edge and look down on the underside join. You will see two small notches where you can get a pen knife/lever in. Dont poke in too far especially where the buttons are. Now lever the back off the front by leaning your knife/lever in the same direction as the screen front. Once you have the first clips free you can work all the way around in the same way taking care not to damage the plastic much.
I hope that helps someone else who is stuck like me at first and found this Q unanswered and eventually I decided I had nothing to loose lol. Regards