1670: unable to load module d:\iss setup.dll,error code:193

this game was not released for the PS3 and may not be compatible with the newer hardware.

User32.dll errors come from issues inside Windows that involve the User32.dll file. This file contains important information regarding graphics details for objects such as dialog boxes. When there is an issue with the file, there will be problems when using other programs that use dialog boxes and other pop-up windows. Normally, a quick Windows update will solve all errors and problems.

Click the "Start" button and then "Run." This will open the "Run" window. Type in "wupdmgr". This will open Windows Update. It will now scan the computer to detect any necessary updates that are available from Microsoft. Turn on automatic updates by clicking "Start" again, followed by "All Programs," then "Windows Update." Select "Change Settings"; then select "Include recommended updates when downloading, installing, or notifying me about updates." Click "OK" and everything will be set. Windows will download the necessary update and install it to correct the User32.dll errors Hope this helps.

Insert the installation CD and wait for the setup wizard to load. After you insert the installation CD into your computer's CD-ROM drive, a dialog box will appear prompting you to begin installation. If this dialog box does not appear, double-click your CD drive and explore the contents of the CD. Double-click the file called "setup.exe" to start installation.
Select an installation type. In the setup wizard, click the "Next" button until the dialog box asks you to select an installation type. You must select either "Minimum," "Typical" or "Advanced" installation. Although the "Typical" installation is recommended, you can select "Minimum" if you wish to use as little hard disk space as possible to install Microsoft Office XP. Selecting "Advanced" will require you to select individual components you wish to install. Do not choose this installation type if you are unfamiliar with these components.
Finish the setup wizard and restart your computer. Click "Next" and wait for the progress bar to indicate that the installation was successful. Click "Finish" to close the dialog box and finish installation. When the dialog box closes, restart your computer
watch this video also

i hope this helps you

please feel free to message me you have any trouble installing your microsoft office and ill try to help you in the best way that i can.

HI, Step 1: Insert the Microsoft Office 2007 Enterprise CD. If the Setup Wizard does not automatically begin, then click Start > Run > D:\setup.exe

Step 2: Enter the Product Key from the back of the CD jacket. Note: This is a unique code. Please keep in a safe place!

Click Continue.

Step 3: Check the box "I accept the terms of this agreement" and click the Continue button.

Step 4: Choose an installation option, Upgrade (removes Office 2003) or Customize (keeps Office 2003 installed and adds Office 2007, allowing you to use them both).

Note: Outlook 2003 will be uninstalled in either option. Outlook will be updated and your user settings and mail will migrate to the new version.

If you click Upgrade, go on to Step 5.

If you click Customize, go on to Step 4a.

Step 4a: Click the radio button for "Keep all previous versions."

Click the Installation Options tab, left-click the first drop down box and click Run all from My Computer

Click Install Now.

Step 5: Installation will begin. It may take 15-30 minutes to finish.

Step 6: Click Close to complete the installation.

Step 7: The first time you launch any Office program, you will be prompted to activate the software. As long as you have an active Internet connection, choose the default option and click Next.

Step 8: When the activation finishes, click Close.

Step 9: Click OK to finish.

I HOPE THIS WILL BE HELPFULL TO YOU .

PLEASE DON'T FORGET TO VOTE ME .

GOODLUCK

The problem is that the Cyberlink software that comes with the drive cannot be installed on a Windows N Edition (Microsoft created the 'N' edition following a European lawsuit). In order to fix this problem in Windows media player needs to be installed on your computer first.

You can obtain a copy free, direct from Microsoft here-

http://www.microsoft.com/windows/windowsmedia/player/default.aspx

you will then need to restart your computer and install your drive software again.

//javaftper

well thats frusterating somtimes, i can tell you the problem might be a disk read error, that means or your disk or the cd-rom, and it might be a ram problem, so try different disk....under different burning sppeeds......

Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Why do you want to install the router ? Can you help me understand your setup , your ISP ?

- Ranjit
[email protected]

Uninstalling other makers software may remove a system file which prevents installation of Coolpix drivers from the Nikon View v5.1 CD on Windows 98SE systems. It has been reported that, when connecting a Coolpix camera to a Windows 98SE machine, the hardware wizard will not recognize the appropriate driver; this setup fails because the file "IMAGEHLP.DLL" is missing from the system. Installation will stop with an error message which mentions this file. This problem may be caused by the earlier removal of another makers software from the operating system. To solve the problem, first disconnect the camera then follow these instructions to copy the appropriate file from the Win98SE CD back to the correct directory on your computer: Place the Win98SE CDROM in the CD-ROM drive. From the Start Menu select Run, type in SFC.EXE. Select "Extract a single file". Type in IMAGEHLP.DLL to the field provided. Click start. When the next dialogue box appears click "skip". This dialog box appears: Where e:\WIN98\ should be the Win98SE CD-ROM (your CD-ROM drive may use another letter other than "e"). Copy the file to the same destination shown and a screen will appear showing that "File has been successfully extracted". Next, remove the Win98SE CD-ROM from the CD-ROM drive and replace the Nikon View 5 CD in the CD-ROM drive. Reconnect the camera. The hardware wizard should automatically detect the camera and install the driver from the Nikon View 5 CD.