Question about Boating

1 Answer

Cummins qsd 2.0 150

Hi I have a QSD 150 that has just had a new ECU and Turbo fitted under warranty. Hoever now sometime it just wont rev over 3000RPM other time it is fine. In addition the sterndrive trim only works at low revs and will not work at high revs. When the Engine hrs were 180 but since the new ECU are now 6hrs. Thank for your help.

Posted by Anonymous on

Ad

1 Answer

Fabrice Wolters

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 331 Answers

I think you should go back to your dealer to fix those problems. The original problem isn't solved totally with the done replacements.
Working yourself on the engine could void your warranty!

Posted on Nov 15, 2017

Ad

5 Related Answers

Anonymous

  • 129 Answers

SOURCE: rev counter

The revs were reset wrong, get them re adjusted. Go back to same garage and ask for it to be done free, as it was done wrong first time.

Posted on Jul 18, 2008

Ad
keemo68

Ronald Mueller

  • 1263 Answers

SOURCE: diesel turbo with no power at low revs

this tells me that the injector timing is off just a bit or you may have a weak injector all together.

Posted on Sep 05, 2008

Anonymous

  • 1 Answer

SOURCE: I have a Renault Megane

Have you tried the idle control valve, these can stick & cause the engine to rev high. Have had this problem on a few cars, a Vectra being the worst, but quick clean with brake cleaner & good as new.

Posted on Jan 16, 2009

Anonymous

  • 1 Answer

SOURCE: jaguar x300 no pulse at injectors replaced ecu, what else could i

does it have a spark at the spark plug leads? if no it sounds like the crank shaft sensor!!

Posted on Apr 05, 2009

Anonymous

  • 133 Answers

SOURCE: when im idling in park or neutral engine revs high

These cars used a motor underneath the intake manifold to control the idle. The crank sensor may need to be checked, the signal to the motor needs to be checked. If you have a seperate control module (passenger footwell, right side, behind the plastic) under the main fuel control module, you may want to check the wiring on that as well. The Haynes manual for these vehicles describe the system very well.

Posted on Nov 03, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a vauxhall vectra 2,0 litre diesel design. The car is in limp mode. Wont rev above 3000rpm. It feels like the turbo isn't coming in. The engine management light is on const. Any ideas


need to be plugged in to diagnostic machine to give you the problem
car will stay in limp/home mode till its cleared with the machine..

Apr 09, 2016 | Vauxhall Cars & Trucks

1 Answer

Wont rev above above 3000rpm


Hi Anonymous, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Such as what kind of vehicle

Sep 01, 2014 | Cars & Trucks

1 Answer

Will not kick down high rev


maybe the ECU blocks the engine, becase of some kind of fault...
Try to read faults from ECU via some kind of reader... Can buy one on EBAY for few bugs, 10 maybe

Apr 16, 2014 | 2002 GMC Envoy

1 Answer

Replacing piston rings


Have the fault codes read. Replace faulty items. Use only genuine items as replacement as non-genuine are not always compatible with the OEM fitted CPU units I suspect an accelerator position sensor or a MAF sensor.

Jun 04, 2013 | Kia Sorento Cars & Trucks

1 Answer

HYUNDAI TUCSON 2006 POOR IDLE / WON'T REV


On many diesels, when I read codes they mention an egr valve, but what they are really talking about is the throttle actuator. What I don't understand is why you no longer have any codes. there are some codes which do not turn on the light on the dash because the computer hasn't decided yet that it is a hard code, so check for them anyway. The symptoms you are describing usually turn out to be either the throttle actuator, fuel rail pressure regulator, or a ripped turbo hose

Mar 06, 2013 | Cars & Trucks

1 Answer

Xjr won't rev over 3000rpm in neutral, is this normal ? Seams fine under gear


Yes this is very normal as most of new cars has that safety measure so that you can not put rev very high in stand still , to protest the engine , that is why it has an ECU lock for that, VERY NORMAL

Jun 24, 2009 | 2003 Jaguar Xkr

2 Answers

Freelander TD4 2004 Engine light comes on at 3000rpm cuts power


I don't wish to worry you but I think the turbo kicks in at around 2500rpm and it sounds like it isn't doing so, hence the management light coming on. It could be that failing. Be careful here, apparently the turbo uses the engine oil to maintain its operating temperature and if the turbo seals fail in anyway it eats the engine oil, with the resulting total failure of the power unit. So if you do nothing else, keep an eye on the engine oil level. (You may also notice oil smoke out the exhaust as well).
Unfortunately it looks like a trip to the dealer for them to check what the engine management is saying.

Apr 01, 2009 | 2002 Land Rover Freelander

1 Answer

It does not have power to overtake although when stood it will rev it is an audi A3 1.9 tdi and is 2000


Your motor probably runs in "failsafe" mode (won't go past 3000rpm in highest gear), but in that case the ECU warning light should also come on (which might also be broken ofcourse).

Try releasing and reconnecting the battery (-connectors), which should "reset" any fault-codes in the ECU and see if the TDI power is back. Please note that the "cause" of the ECU faultcodes will probably put the motor back in "failsafe" mode within minutes ! But at least you've verified that your motor runs in "failsafe" mode due to serious faultcodes in the ECU.

You should have a dealer/expert read the ECU faultcodes using VAGCOM to determine the cause. A dealer will charge something like 50~60$ for it.

Since it's a 1.9TDI my best guess is that's it a broken N75 turbo-valve (common TDI issue, replacing the part yourself will cost less than $30 and 15 minutes). When the dealer suggests a complete replacement of the Turbo-unit (quite expensive), please have a TDI-expert do an 2nd opinion ...

Mar 21, 2009 | 2005 Audi A3

2 Answers

Slow on starting , holds back when driving, even on an A road or motorway my vehicle is mitsubishi shogun long wheel base 2.8 turbo diesel


turbo must have a problem or remember tro vehicles have turbo lag. . . usually mitsu's turbos start giving power around 2500prm - 3000rpm. .

but usually on older turbo diesel mitsus the turbos are the first to go. . . .

Oct 21, 2008 | Mitsubishi Pickup Cars & Trucks

Not finding what you are looking for?
Boating Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boating Experts

ray gallant

Level 3 Expert

71004 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35843 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you a Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...