I was trying to install my new Di 524 and forget the keys

You will need to login as admin and set it up again. Connect per ethernet cable, open a browser and enter 192.168.0.1 You should see a router welcome screen or logon dialog login as admin the default password maybe one of several things depending on the particular revision/edition blank/null 'admin' 'password'
Support for this model is available at http://www.dlink.com/products/?pid=DI-524&tab=3 manual at ftp://ftp.dlink.com/Gateway/di524/Manual/DI-524_manual_06292005.zip
Once you're in you will have to set up an ISP connection which may require your ISP username / password and selecting a protocol particular to your ISP and setting up the wireless WEP key

This FAQ is for the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624M, DI-624S, DI-774, and DI-784.

Step 1 Open a web browser and enter the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The username is admin and the default password is blank (nothing). Click OK.

Step 3 Click the Tools tab and then click Admin to the left.



Step 4 To change the administrative password, enter a new password in the Admin section.

To change the user password, enter a new password in the User section.

Step 5 Click Apply then click Continue to save the settings.

Note: If you forget your password, you can reset the unit to factory defaults.
Click here for instructions.

You can reset your router.

To reset your router, use the following steps (from http://technicallyeasy.net/2008/02/how-to-reset-d-link-di-524-wireless/):

1. Press the reset button [the tiny button on the back of your router, marked Reset] for 10 seconds. You can use a small object, such as a paper clip to hold down the button.
Do not power off the unit while the router is being reset.
The unit should now reboot, and once the WLAN light stops blinking the router should be reset.

2. Open up your Web browser and enter 192.168.0.1 in the address bar.
3. For the login, enter admin as the ID and leave the password blank.

The router has now been reset. Follow the steps in Securing D-Link DI-524 Wireless Router to secure your router.
admin username: admin

Default admin username: admin Default admin password: <blank>

Hello...the pre-shared key is also known as the network key, and you can find it within your router settings.

Open a web browser, and login to your router by typing http://192.168.0.1 into the address bar.

You are prompted for a username and password. Enter username: admin and leave the password blank, or enter your password if you have set one.

Go to Home >Wireless. You should see your pre-shared key, or network key there.

Hope this helps you, but please come back to Fixya if this does not work or you need further help.

You can put in your wireless code by connecting to the DI-524 using the LAN cable. Open you web browser (Internet Explorer) on your computer, and type in the address http://192.168.0.1 This should take you to the sign on screen for your DI-524. user ID will be "admin" and password is blank unless you have changed it. Go to the "Wireless" button on the left. There you can specify the type of wireless security you want and the secret code. The most simple security is WEP, with 64bit WEP encryption, and "Open System" authentication. Enter a 10 digit numeric code in "Key 1". You don't need to fill our the other keys. NOTE the number down for future reference.

http://192.168.0.1

then type user name:admin
password is:admin or blank

then enable DHCP.then u can get ip automatically.

1. Log into the web-based configuration by opening up a web browser and typing in the IP address of the router (192.168.0.1).

2. The default username is admin (all lower case) and the password is blank (nothing). Click OK.

3. Click on the Home tab and then click Wireless on the left hand side.

4. Select WPA-PSK using the radio buttons.

5. Choose a key (password). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients.

6. Click on the Apply button then click on the Continue button to save your settings.

Note: If you are configuring your router from a wireless adapter, you will lose connectivity as soon as you click Apply. You must enable WPA-PSK on your adapter and enter the same exact passphrase as you entered on your router.

how to make security code to my wireless router sitecom46E2CE this pls. i need your help to protect my network. thanks..

Step 1 Log into the web-based configuration by opening up a web browser and typing in the IP address of the router (192.168.0.1). Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK. Step 3 Click on the Home tab and then click Wireless on the left hand side. Step 4 Select WPA-PSK using the radio buttons. Step 5 Enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. Step 6 Click on the Apply button then click on the Continue button to save your settings. Note: If you are configuring your router from a wireless adapter, you will lose connectivity as soon as you click Apply. You must enable WPA-PSK on your adapter and enter the same exact passphrase as you entered on your router.

Step 1 Log into the web-based configuration by opening up a web browser and typing in the IP address of the router (192.168.0.1). Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK. Step 3 Click on the Home tab and then click Wireless on the left hand side. Step 4 Select WPA-PSK using the radio buttons. Step 5 Enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. Step 6 Click on the Apply button then click on the Continue button to save your settings. Note: If you are configuring your router from a wireless adapter, you will lose connectivity as soon as you click Apply. You must enable WPA-PSK on your adapter and enter the same exact passphrase as you entered on your router.