I bought this system in a private sale. It is a brand new system in box.
I opened the box and assembled the parts.
I have connected all the cables at the right place but my rear (surround) speakers and centre speaker is not working.
I checked all the speakers and they are working. Problem in the subwoofer output socket or something else..
If anyone knows the solution for this please let me know.
Thanks...
In the 3D processing turn on the Pro Logic and the for the mode as well set it to pro logic.
it simulates 5.1 surround.
this is what I did and it's decent. Other way would be to run the system through a amp/receiver that supports 5.1 surround.
1,876 views
Usually answered in minutes!
Hi there,
Thanks a lot for your advice.
Actually I did try exactly the same way and all except one speaker is working but its very low sound compared to earlier one.
Before with 2 speakers it was loud but after I did changes according to your instructions two more speakers are working but all speakers except centre one has low sound output.
If you have any solution for that then pl. let me know.
Thanks and have a nice day!!!
×