MP3 The problem I have is that it stops playing after 10 seconds. I can't seem to find the setting in it to get it to play the songs straight through.

you will have to go to your settings and change them. you have it set to just play intro now. you need to set it to play the whole song. hope this helps.

it may have a pre song setting that only plays 10 to 12 seconds of a song

Your Uncle's player is stuck in INTRO mode. To remedy this problem
1. Play a song
2. press the button on the side of the player
3. Select PLAY MODE
4. Choose NORMAL

go in to your settings and check all of them there should be one that says intro or something to that sort if its not in the settings it might be in the play mode but you disable that and it will play the whole song again. Its because intro is a feature on the I pod and other mp3s that lets you listen to the first ten seconds of the song to see if thats the song you want to hear. Hope this helps you out

You probably have the setting on INT (Intro), that means the songs will only play for 10 secs (a sample) and continue throughout the whole list until the user stops it by pressing the INT button. If it still is acting funny, feel free to email more details.

I HAD A VISUAL LAND MP3 PLAYER. ONLY PLAYED FIRST 10 SECONDS OF SONG. IT IS SET TO INTRO. WHILE THE SONG IS PLAYING PUSH THE BUTTONS AND YOU WILL SEE THE OPTIONS COME UP. SONG HAS TO BE PLAYING. CHANGE FROM INTRO.

will not connect to PC

WAHA i've fixed it it was on repeat intro which means it plays the first quarter of he song so pretty much try to look at the repeat button and see if it is on that.....

if you are using ROCBOX go to settings./ play back settings..enable party mode/replaygain/crossfade...its playing like all intros......if this is straight iriver firmware you can try settings and look in playback setting also

You downloaded samples only - you need to acquire the full song