Can not get ringer to work

raise the volume of ringer or go to settings and allow ring and vibrate

My iPhone Won't Ring! Here's The Real Reason Why.

www.payetteforward.com > Tech Blog > iPhone

Jul 19, 2014 - When the phone rings, you're going to hear it. ... Most of the time, the reason an iPhone doesn't ring for incoming calls is that the user .... when i checked back, my sound didnt work. do i need to go to the apple store? thanks.

Things to check if your phone doesn't ring when people call

www.centurylink.com/help/index.php?assetid=220

CenturyLinkThings to check if your phone doesn't ring when people call. Your friends and family tell you they try to call and either it just rings and rings or maybe they hear a ...

Volume buttons or ringer not working - iPhone 4 - iFixit

https://www.ifixit.com/.../Volume+buttons+or+ringer+not+working

iFixitSo for two weeks now my side volume buttons don't work. When I try to change .....However, the phone doesn't ring when someone calls or texts. The speakers ...

Why doesn't my landline ring? - phone telephone bt ' Ask MetaFilter

ask.metafilter.com/190429/Why-doesnt-my-landline-ring

mY dear Your Phone Ringer Default So Please change Ringer
And Ringing Sound Problem will solved

Here some solutions for your problem + a link to the user manual.

**Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
To select the ringer:
1) With the phone in standby, press [vol/ / ] or [vol/ / ].
2) The phone will sound the different ring tones at different volumes. To turn the ringer
off, select RINGER OFF.
3) When the phone sounds the ring tone and volume you wish to use, press [end].


**Temporarily Mute Ringer
If the handset is off the base while an incoming call is ringing, simply press [end] to mute
the incoming ring. The ringer will sound with the next incoming call.
Note: You can only mute the handset ringer if the handset is off the base when the phone starts
ringing.
Adjusting the Earpiece.

**Here is also a link to the phone manual http://www.uniden.com/pdf/EXI4561om.pdf

hi justin,

you may wanna visit this link for reference:

http://www.samsungtelecom.com/PDF/A460.pdf

to change the ringer volume from the main menu:
1.press menu for menu options
2.press 8 for sounds
3.press 1 for ringer volume
4.press 1 fro calls
5.select off/vibrate/1-beep/level1-8/ring+vib,and press ok

User options
Press FCN while on hook to change settings
(* shows current, follow display instructions to set):
Ring Type-select:
Normal (for an audible ring)
Vib/Norm (vibrates for five seconds, then rings)
Vibrate (vibrates until answered)
High Noise Mode-select:
Normal (for most office environments)
High (for moderate background noise)
Severe (for extremely noisy conditions)
Current IP address: may not be edited.
Extension number: may not be present for some protocols.
Additional options may be present

There's a ringer adjustment on the side of the phone. Does it ring in another jack? Does another phone ring in this jack? Panasonic system ringing is controlled by system programming, usually 408-410 or somewhere near there. If the phone works in another jack or another phone works in this jack, then you need to either turn on the ringer or turn on ringing at that port.

You may have to find the programming in the manual, or call your service tech.

Carl

Hello

First of all please check your ringer settings to see if it is not turned off or low

If you have checked that and they are intact then your ringer/speaker is faulty and needs to be replaced

If you do this you will see that your phone will work again

Goodluck

yes u need to take it to repair shop

Are you able to select tones and adjust ring volume? If you have already tried this, your phone needs to go to to the repair shop and get a replacement ringer. Its not very expensive and is easily available with all repair shops. Good Luck