HP Officejet 5610 All-In-One InkJet Printer Logo

Related Topics:

Question about HP Officejet 5610 All-In-One InkJet Printer

1 Answer

Error code 0xd0620230

Had this 5610 for more than a year now, been a good printer, and now this error pops up all the time. Cant print or fax its just dead. Little help offered from HP. Any clue, any remedy?

Posted by nigedvd on

  • dac c Feb 04, 2008

    my printer says error 0xd0620230 reset power

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 54 Answers

Hhhmmm try to download a resstter for your printer model, cause that error code cud mean that some part of your printer has reach its limits, printers nowadays have a counter in it. if you cant find any resetter software for your printer you shoukd call the HP tech. support cause they are the only who knows the right key combination on your printer panel that allows the parts to be reset.

Posted on Sep 18, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

The printer wont printer and displays "Unable to Print. See Troubleshooting and Routine Maintenance Chapter in Users Manual"

Unplug the printer for about 15seconds and then plug back in and power up.......this should reset the error code! Test print and you should be good to go!
0helpful
1answer

HP M1319F Stop Printing Fax Error Reports.

go to the fax repots,conformations,their u select send only.
0helpful
2answers

My L295 fax machine does not recieve and print

The Fixing unit of the fax is blown.Replace the fixing unit.
0helpful
2answers

Will not scan, copy or print error code e7-11

Replace the Mother Pwb the part number is CPWBN1460DS51..... Good Luck
0helpful
1answer

HP Officejet 4315v Error Code 344*

1. issue may be with telephone line conditions,  try sending a fax at a different time 2. Disable Error Correction Mode 3. reduce thefax speed 4. try a fax test to  hp at 1888 473 2963 
0helpful
1answer

Error code C-B116, what does it mean?

Code

B116
Description
Communication error with the fax board
An undefined communication error occurs between the controller and the fax board.

Remedy
1 Check the connector CN106 on MFPB for proper connection and correct as necessary.
2 Change FAXB.
3 Change MFPB.


That error means a problem with the FAX Board. Now, checking connections or re-seating connections of fax board to main board are advised first, then replacing fax board if that fails.
0helpful
1answer

How do i retrieve fax report from hp 4215 all in one

1 Press Setup.
2 Press 1, then press 1.
This selects Print Report and then selects Automatic Reports Setup.
3 Press ! to scroll through the following report types:
– Every Error: prints whenever there is any kind of fax error (default).
– Send Error: prints whenever there is a transmission error.
– Receive Error: prints whenever there is a receiving error.
– Every Fax: confirms every time a fax is sent or received.
– Send Only: prints every time a fax is sent.
– Off: does not print fax reports.
Note: If you select Send Only, you will also receive error reports if there is
any kind of error generated.
4 Press OK to select a report

More information? you can download manual here
http://h10032.www1.hp.com/ctg/Manual/c00095626.pdf
2helpful
1answer

Confirmation page

You can configure your HP all-in-one so that it automatically prints error and confirmation reports. If you need printed confirmation each time a fax is sent, follow these instructions before sending any faxes and select Send Only. To set automated report options from the control panel Press Setup. Press 2, and then press 1. This selects Print Report and then selects Fax Report Setup. clip_image001.gif Press to scroll through the following report types: Every Error: prints whenever there is any kind of fax error (default). Send Error: prints whenever there is a transmission error. Receive Error: prints whenever there is a receiving error. Every Fax: confirms every time a fax is sent or received. Send Only: prints every time a fax is sent indicating whether the fax was successfully sent or not. Off: does not print any error or confirmation reports. Press OK to select the report.
21helpful
6answers

Error 232 receiving fax

fax error 232 indicates a communication failure between the sending and receiving units. I'd check for line noise on the phone (you can hear it as cracks and pops) If your fax line is not dedicated, any noise from another phone pickup or an answwering machine can cause the failure.
0helpful
2answers

Error message; no printing of text

What application were you trying to print from at the time. Does the printer give this error message all the time or only from this program? I need this info to assist you bzoe...lilacgerry
Not finding what you are looking for?

775 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1124 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6448 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...