Can't get past the align screen

Main system control memory IC fault. Do a reset to this set and check. If it do not help you, contact any service technician to replace this IC. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

When you say tapping,is it coming from the top of themotor?

Well i sorry that has happen to you. It seems you have to hard reset your device

Too do that:

1. remove the battery cover.
2. observe that by the USB port, there is a small indentation. This is the reset switch access.
3. Keep the slider closed.
4. power the phone on.
5. press the "talk" and "end" buttons; while holding them down, use the stylus to probe into the reset switch hole at a 45 degree angle to the major axis of the phone.
6. when you get to the "press enter to reset the phone" page, press the center dpad.

That should fix it. You will lose all your data and contacts sorry to say

Hi there


You can try doing a factory reset/hard reset of your phone to resolve the problem. You don't have to worry about the data and files in your phone's microSD card since that will not be deleted. But it will delete all your data and customized settings and remove all applications that you installed. If you want, do a backup of any data or files that you want to keep before proceeding with the hard reset.


There are two ways to do the hard reset: via settings and using phone buttons.


Performing a factory reset via settings

1. From the Home screen, press MENU and then tap Settings.


2.Scroll down the screen and then tap Privacy > Factory data reset.


3.On the Factory data reset screen, tap Reset phone, and then tap Erase everything.


Performing a factory reset using phone buttons (If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.)


1. With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.


2.Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button..

3.Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.

4.Press VOLUME UP to start the factory reset.

To Hard Reset Samsung Seek to Factory Default Setting: 1. From Home menu screen > Main menu tab, located at the bottom 2. Tap Settings 3. Scroll down to the bottom of your cell phone menu 4. Tap Reset 5. Tap Reset Settings 6. Read the statement displayed then Tap Proceed 7. Enter the 4 digit number then Tap Done If you want to unlock it

Make sure you have "never turn off screen" checked, To do this tap "change prferences" tap the forward arrow until you see "battery saving preferences". Tap "battery saving preferences" then tap "never turn screen off". Tap "done" and make sure that "switch off when external power is lost" is not checked. Tap "done". If you do not see this option go back into "change preferences" tap the forward arrow until you see "show menu options" it should read "show fewer munu options"

Performing a Hard Reset

Perform a hard reset only when you want to clear all
user-installed settings, applications, and data from RAM
(Random Access Memory), where data and applications you have
loaded are stored.

CAUTION: If you perform a hard reset, your Pocket PC loses all data
and programs not saved in iPAQ File Store.

To perform a hard reset:

1. Press and hold down the Calendar and iTask buttons.
2. While holding down these buttons, use the stylus to
lightly press the Reset button on the bottom of the iPAQ
Pocket PC for about two seconds.
3. When the Pocket PC screen begins to fade, release the
Calendar and iTask buttons first, and then remove the stylus
from the Reset button.

Note: If you simultaneously push and hold the Reset, Calendar,
and iTask buttons for more than two seconds, the battery
disconnects. To restart the device, either plug the device into the
AC Adapter or press the Reset button again.
After performing a hard reset, you may need to reinstall
applications stored in iPAQ File Store to restore shortcuts and full
functionality.

4. The Pocket PC resets and powers on.

To return your iPAQ Pocket PC to factory settings after
performing a hard reset:

1. Tap Start > Programs > File Explorer > My Device.
2. Tap the iPAQ File Store folder to open it.
3. Tap Edit > Select All.
4. Tap and hold the selected files, then tap Delete.
5. Tap Yes to delete all file in iPAQ File Store.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

TE TENGO LA SOLUCION
COTACTO: [email protected]

If the screen calibration is way off then it seems that you can't even click on the crosshair during screen calibration. However, tapping on the crosshair does seem to adjust the calibration a little in the right direction each time, it's just not obvious that anything happened. So the trick is just to keep trying - gently and repeatedly tap the same spot on the crosshair for several seconds - eventually the screen will calibrate.

Low or flat battery. Connect to mains charger and fully charge.