Question about Mitsubishi VS-60707 60" Rear Projection Television

Mitsubishi VS-60707 60" Rear Projection TV

We recently had problems with the power to our house due to tree in power line up the road from us. We lost some power but not all. It was at a low level for about 30 minutes. Our TV along with all of our other home theather system is on a surge protector. I immediately turned the TV off when we started having power issues. When the power was fully restored we turned the TV back on only to discover that the convergence was messed up. We tried to reset it along with a manual adjustment with no luck. The manual adjust doesn't work at all and the factory reset makes it worse. Please help me if you can.

1 Answer

Lashawn Robinson

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.
Master
1,153 Answers

1. THE CONVERGENCE CAN BE RESET BY PRESSING "MENU 12596" TO ENTER THE CONV MISC. MENU THEN "8970" TO RESET

Posted on Sep 10, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I have a Mitsubishi VS-5004R rear projection tv.It has no picture and no audio

power supply is bad

Mar 19, 2012 | Mitsubishi Televison & Video

1 Answer

Mitsubishi VS-50805 doesn't turn on. We had a brown out due to power lines being damaged by fallen trees and the tv went out a few minutes after other stuff did. now it won't turn on

check the fuses inside the tv .

Jul 03, 2009 | Mitsubishi Televison & Video

1 Answer

VS-50705 50" rear projection TV does not

Hi is most robably that you are having a issue with the power supply.

Jun 27, 2009 | Mitsubishi VS-50111 50" Rear Projection...

1 Answer

I have a Mitsubishi vs-4543 tv that when powered

check the power supply section.. probably the electronic component got problem.

Jun 04, 2009 | Mitsubishi VS-4544 45" TV

1 Answer

Black horizontal lines. Looks like I am looking through venetian blinds

OK this problem is caused by a failing electrolytic capacitor back in the power supply. It's job is to filter AC interfence from that voltage source. Locating the correct capacitor is something not for a do-it-yourselfer. A respectable tv shop experienced with Mitsubishi tv's can usually repair this problem in your home. Average repair cost would be between $200 and $300.

Apr 27, 2009 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

VS-50803 50" Mitsubishi No picture problem

Sounds like your picture tube has went out,, or maybe something simple,, to fix,, i would at least let a tv shop check it out ,, worth a chance ,, nothin 2 loose,, good luck

Oct 05, 2008 | Mitsubishi VS-50803 50" Rear Projection...

1 Answer

DISTORTED PICTURE

look for some cold solder/ loss connections somewhere in the circuits...

Aug 11, 2008 | Mitsubishi VS-50111 50" Rear Projection...

1 Answer

Mitsubishi vs-50609 wont stay powered on

Hello nicolastran,

I gave this advice to someone with this same problem so here it is again:

It sounds like your shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

Jun 24, 2008 | Mitsubishi VS-50609 50" Rear Projection...

1 Answer