Question about RCA F36450 36" TV

TV won't respond to ANY remote control

I have two universal remote controls that have, up till now, allowed me to control this tv just fine. Suddenly the other day, neither of these remotes will cause any kind of response from the tv...so we replaced the batteries in both and even tried reprogramming both remotes to no avail. It's as though my tv has gone blind and can't see anything coming from my remotes. Any idea's? Thanks!

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
2 Answers

Unplug the tv, wait 1 minute so it resets to factory settings then reprogram the remote

Posted on Jan 07, 2010

David Makowski

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
Expert
140 Answers

You need to change the I/R receiver on the front panel pc board (which can be popped out of the top front of the tv on the plastic key panel without removing the back cover) Location# IR13401 Part# 245282

Posted on Aug 21, 2007

1 Related Answer

Anonymous

25 Answers

SOURCE: TV won't respond to ANY remote control

Eagle 57 had the answer, your TV's are blind. The remote control sensing circuit in the TV is faulty. No remote will control it anymore.

Posted on Aug 11, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I NEED THE CODES NUMBERS TO PROGRAM THIS TV WITH UNIVERSAL CONTROL

GE Universal Remote Codes ' Jasco

https://jascoproducts.com/support/ge-universal-remote-codes

Make a note of which version you have and replace the batteries and cover. A version 2 through version 4 remote will have a "V2" to "V4" after the model number. ... Programyour GE Universal Remote using the correct code list and instructions. ... Sometimes a code will allow limited function control (e.g. volume and channel ...

Universal Remote Control Codes

www.remotecodelist.com/

Codes and links for a number of universal remote controls, including Sony, RCA, ... If you have a remote for which you know the codes (or a web page that lists them) head to ... How to Program a GE Universal Remote Control .... look for your model of TV or VCR and find the online instructions that include the remote codes.

RCA Universal Remote Control- Target Programming ...

Jan 05, 2016 | Coby TF-TV3217 32 in. LCD TV

1 Answer

Remote for grundig glcd1906hdvw stopped working. Tried all the suggested "fixes".

It will be best to buy one universal remote control to setup with the TV, rather than trying to repair the present remote control. Setup code list to remote control will be there along with the packing. If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given. Check them and determine which remote control should be selected for your TV.

Mar 09, 2013 | Televison & Video

2 Answers

My sharp aquos tv suddenly won't change channels. It was working fine a few days ago. We've had it for five years now. Model lc-37d4u The remote allows us to adjust vol and mute but no other functions...

U can tries take out the batteries,pushes all the buttons a couples times,wait awhile put batteries back,see if that solved ur problems.Not the remote is garbage now.Remote control have dead CPU chip or it CPU is short will have some functions lelf,remotes devices are heavily depend on it CPU chip.This can't be repair,because it just a circuit board and a CPU chip about it on the remote control,that it.Try website like Remotes.com to buy an original remote or very close to it.

Jan 22, 2011 | Sharp Aquos LC-32GD4U 32 in. LCD HDTV

2 Answers

I NEED TO PROGRAM A MAGNAVOX TV WITH A PHILLIPS UNIVERSAL REMOTE CONTROLL

Find codes and methods here.
http://www.docstoc.com/docs/23925020/Programming-Remote-Control-Brand-Codes-TV-Sets

If those codes dont work try the last three(or four) numbers of your TV's serial number.

On my universal remote is just a matter of holding down the TV button till the light stays on, then punching in the three digit TV code. When the TV turns off it's the right code. But read your manual for your controller.

Oct 08, 2010 | Universal Remote Control Universal IR...

1 Answer

Universal remote suddenly does not work w/television.

http://www.remote-codes.com/Codes4UniversalRemotes.htm

Feb 01, 2010 | Sanyo DS31520 31" TV

1 Answer

I must have hit something on my direct tv remote. It suddenly went to zoom mode and I have tried everything, even a tech from direct tv couldn't figure it out. The picture is huge. It is an hd tv, but...

Unplug everything. Leave it unplugged for about an hour and try again.

Nov 30, 2009 | Universal Remote Control DIRECTV Universal...

1 Answer

Which universal remote will allow me to disable closed captioning?

Generally you will need the original remote to control functions such as captioning and other advanced options. Universal remotes are fine for the basics such as channel selection, volume, and on-off. The part number I found is Phillips part # 313922886464 and looks to be available at partstore.com for about $22.00 with a 30 day warranty.

Nov 09, 2009 | Philips 27PT543S 27" TV

1 Answer