Hi I've got an all in one PB one two M, with

more detail please

that particular model of computer l305-s5919 has RGB component out while the tv seems to be rca input.
does the tv have component in.
you may find an adapter like this might work
http://www.ebay.com/itm/Ypbpr-component-to-Composite-AV-RCA-audio-video-converter-with-power-supply/272260592065?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D44770%26meid%3D75516a845eb841a3bec53062c7dfac66%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D230912528485

You need to find out what Co. made the touchscreen for that model to see if they have updated touchscreen drivers for windows 8.
Sounds like your machine was intended for XP,
Good luck!

Try heating it with a torch and use PB Blaster on it.

you need to turn it in, the mother board of phone is out, warranty issue

I assume HANSPREE SV32AMUB is an external monitor and you want to watch what is on your laptop PC transferred to your TV. If this is the case Toggle the Fn key on your laptop.

EXPLAIN IN DETAIL WHAT YOU HAVE AND WHAT YOU WON'T TO DO. I'M A LITTLE CONFUSED

Hi. A couple of things to try.
Switch everything off. Make sure your connections are sound then switch on the TV. Then switch on the mac. With luck the system should sort itself out. However, I have heard of others who have had nothing but grief trying to get similar arrangements to work.Normally ther Mac does it's own thinking, works out what is at the other end and puts up the display without any problems - other than the picture width being invariably wrong until you find the correct size.
There are no drivers to download - the issue is generally that the TV is not reporting back to the computer the correct resolution and scan rates.
You may have to dive deeper into the TV's menus to locate the means of altering the parameters.

What you have hooked up(y,pb,pr) is component video which carries the video. The sound is trnasmitted through a different cable, RCA(white and red) probably in your case. You need to make sure taht your component connections are in all the way and are making contact and, taht all three are in the correct inputs on the flat screen. It is easy to confuse the colors and all the connections are close together making it easy to make a mistake, I've done it myself. Once you have established your connections are correct, make sure you go through your TV's menu to make sure you are the right menu screen(TV,DVD, etc.)

Try connection your subwoofer to your tv with this cable
I've you can't do this, read the user-guide. Dont got user guide ? Contact Creative