Question about Lands Phones

3 Answers

T7208 continually says "message for you" can't seem to clear

Have tried unplugging

Posted by abl14221 on

  • 1 more comment 
  • abl14221 Mar 24, 2009

    it identifies another phone station.Tried ringing that extension.Messsage does not clear.Still says message for you.appreciate advice!!!! Thanks

  • abl14221 Mar 25, 2009

    EXCELLENT you were correct.Finally cleared! Thanks alot

  • Anonymous Apr 08, 2009

    I have the same problem when feature 65 is entered it prompts "Hold or release". What does this correspond to?

    Thanks!

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thank you, Feature # 65 worked for me on a nortel T7208

Posted on Apr 24, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Fix is Feature#65 for me.

Posted on Apr 08, 2009

Ad

george peters

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 860 Answers

The message was probably left manually by a co-worker and not the voice mail try entering feature 65 that should send you to who turned on the message light.when the station is called back the light should go out.

Posted on Mar 24, 2009

  • george  peters
    george peters Mar 24, 2009

    That should of worked . Whats it doing when you press feature 65?

  • george  peters
    george peters Mar 25, 2009

    its a guess that that station left multiple messages.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't open internet. Everything seems to be locked up


I assume that you unplugged your router and then tried again.
Some modem/routers have a battery in them so you might have
to unplug it then remove thebattery from the bottom.
Plug the battery back in and the elec plug.

And try that, if you are using a laptop try unplugging it
and removing the battery same as above.
Good luck
Joe

Mar 04, 2017 | Computers & Internet

1 Answer

Dryer timer works perfectly but the dryer itself wont turn on. Ive tried unplugging and plugging back in, tried circuit breakers, none of that makes it turn on. Lint screen is clean. What do i do?


try unplugging, while unplugged hold in on button for 15 seconds, then plug back in and see if that works. sometimes on some models, it does a reset

Aug 27, 2015 | Dryers

1 Answer

No power


unplug the wii from the power source then unplug the power source from the wall, wait 30 minutes and try again, if this doesent work leave unplugged for 24 hours.

Dec 28, 2011 | Nintendo Wii Console

1 Answer

Cd are stuck can not eject and cds will not play can hear motor trying to delete but it wont happen


Have you tried to unplug the unit. And leave it unplugged for about 10 minutes. If it is mechanically jammed this will not help. But if it is the firmware that is scrambled, then this will reset it. If it is mechanically jammed, then you might try tipping the unit on the back, then try ejecting it from that position. I would try clearing the firmware by unplugging and leaving for 10 minutes first.

Jan 19, 2011 | Car Audio & Video

1 Answer

Computer power would not shut off, unplugged computer, now when you plug in computer, power comes on, but there is "no signal" displayed on monitor.


Hopefully, unplugging the computer forcefully didn't damage any of the components.

There are a couple things you could try. First thing, unplug your computer, open it up, and try to:

  1. Remove each of the RAM modules from the motherboard and put them back in.
  2. Check to see if any expansion cards are connected, try removing and re-inserting them as well.
  3. Unplug the power supply (Big box in the top corner, usually) from the motherboard. Unplug all the cables and plug them back.

Aug 07, 2009 | eMachines D3315 PC Desktop

3 Answers

No power on for my Wii


Is it plugged in corectly. Maby the plugg.

Jul 11, 2009 | Nintendo Wii Console

2 Answers

Panasonic TH-50PX60U Plasma TV no red color


I had the exact same problem. Thought it was the tv, but it was the cable between my cable box and the tv. Try unplugging the cords and plugging them back in, color was restored.

Oct 12, 2008 | Panasonic TH-42PD50U 42 in. Plasma EDTV

3 Answers

Simplicity air conditioner


I had an e1 error, the fan was spinning but the compressor dosen't.  I don't know witch step i made fix the problem but try it.  I unplug the air conditioning for few minutes, unplug the control panel, get every things  back and it's work fine.I wish that can help youFrançois

Jul 10, 2008 | Kitchen Appliances - Others

1 Answer

SONY TRINITRON DIGITAL TV KD-32DX4OU WITH BUILT IN FREEVIEW :_THE SCREEN HAS FROZEN ON ONE CHANNEL AND WONT CHANGE REMOTE CONTROL IS WORKING OK .ANY IDEAS ON HOW TO RESET ? TRIED UNPLUGGIN ETC THIS IS IN...


Unplugging should reset the it, but you may need to unplug it for a couple of hours. Try unplugging overnite. In the meantime, I'l look up the specific model and try to get you more details.
Dan

Apr 16, 2008 | Televison & Video

3 Answers

Breadman TR555LC


Yes, that just happened to me. The book says E01 means the Breadman is too hot - remove Bread Pan with ingredients, and wait until the Breadman cools down - about 20 min - before preparing a new loaf.

E02 means the Breadman is too cold. Unplug machine and allow it to heat up to room temp. and try again.

For E03,4,5,8 - unplug the Breadman and contact customer service.

Nov 30, 2007 | Breadman TR555 Deluxe Rapid Cool Touch...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

4,575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6101 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...