Aeg lavamat w 1050 electr. rubber problem

I have aeg lavamat w 1050 elect ,since i bought it from the first wash the the ront inside rupper gone damage then the water flow down ,gould you pl, tell that is fabric failer

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Dears, thank you for repling of my subject , i solved the problem with replasing other new rubber .
thank you again for your interesting

Posted on Mar 26, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

AEG Lavamat washing machine Err code

might have to re calibrate unit

Read full answer

Feb 07, 2022 • AEG Washing Machines

0helpful

1answer

I received an error EH1 in my AEG electrolux Lavamat L64850l washing machine, how can solve it?

Problems with the electrical power supply, the appliance remains in the alarm state until achieve conditions of work, and stabilizes the voltage and frequency, and the machine resets quenching (controller to the position "0").
Obviously there is a problem in the electrical network so my suggestion is to call your local electrician or try connect power supply from any other room.

Dado

Read full answer

May 04, 2015 • AEG Washing Machines

0helpful

1answer

My aeg lavamat L washer/dryer has suddenly stopped working and there is no power

Sorry this isnt a solution .. Im just wondering if you did manage to get this sorted as it happened to my machine this morning?

Read full answer

Feb 17, 2012 • AEG Lavamat 16810 Front Load Washer/Dryer

3helpful

2answers

AEG Lavamat 76810 E70 7Beeps Does seem to still work but display shows E70 and 7beeps over and over. Many thanks gary

I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

Read full answer

Jul 14, 2011 • AEG Lavamat 16810 Front Load Washer/Dryer

0helpful

1answer

Hi, I bought a new frontdoorgrip. Partnumber 0012932; for the Lavamat L16810. When mounting the screws I found out that they are too thin: I can push them easily into the holes. Do I need nuts behind...

No nuts. The screws fit into the plastic electric door mechanism which, after you took the screws out, will be hanging iside the machine. Either take the lid off to access or, easier but a bit fiddly, is to feel for it (with your left hand) through the rubber drum seal. With a bit of manipulation you will see the screw holes and door catch appear; line them up and replace screws and plastic facia.
I did the same thing and learned not to unscrew anything without knowing what it's there for!!!

Read full answer

Aug 18, 2010 • AEG Lavamat 16810 Front Load Washer/Dryer

0helpful

1answer