Kenmore 15899 Built-in Dishwasher Logo

Question about Kenmore 15899 Built-in Dishwasher

2 Answers

Dishwasher electronic panel locked

I have a kenmore dishwasher model e665 ultra wash. panel has locked and i cannot unlock it. anyone know how to fix this?

Posted by anitadee on

  • brandiglover Dec 20, 2007

    A CODE OF E6 AND E8 IS ON KEYPAD AND WILL NOT UNLOCK HOW DO I UNLOCK IT?

  • Anonymous Mar 17, 2008

    Good evening friends, I need your help. My Kenmore dishwasher's buttons are not working. The -lock- button keeps flashing and the manual says to hold the lock botton for few seconds and it will un-lock itself. I've done that several times but it will not work. The light goes off but goes back on again. None of the buttons seem to work either. I've called Sears but they require $75 just come in and look and that price does not include anything.....just the estimate. Can someone help me please before I dish out $500 for a new one? THANK YOU IN ADVANCE

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Good evening friends, I need your help. My Kenmore dishwasher's buttons are not working. The -lock- button keeps flashing and the manual says to hold the lock botton for few seconds and it will un-lock itself. I've done that several times but it will not work. The light goes off but goes back on again. None of the buttons seem to work either. I've called Sears but they require $75 just come in and look and that price does not include anything.....just the estimate. Can someone help me please before I dish out $500 for a new one? THANK YOU IN ADVANCE

Posted on Mar 17, 2008

Ad

Anonymous

Remove the touch panel and unplug it for couple of minutes. it should reset>

Posted on Jan 21, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reset for Kenmore Ultra Wash Dishwasher (Model #66517759000)

Assume the "remanufactured" control board has failed.
0helpful
1answer

Kenmore ultra wash dishwasher model 665.17779990 red 'lock on' flashing. Tried holding down 'no heat dry' button for a minute, unplugged for 30 minutes and neither worked. Please help!!

Hi, I'm sorry to hear that.
It sounds like you may have a stuck button on the keypad that's preventing you to unlock it.
If that was the case, a new panel would be needed. Best of luck.
1helpful
1answer

My problem is. The start button is blinking and doesn't start to wash, is just blinking. can you help?

Have you checked to see if you've mistakenly locked it? On mine, if I hold pressure on the start button for 3 - 5 seconds, it locks the control panel. It unlocks the same way.

Let us know it this solves your problem.
0helpful
1answer

Kenmore ultra wash dishwasher

Look carefully at your dishwasher keyboard, to see what key is nearest (above or below) the lighted lock symbol. Usually it's the Heated Dry button. Whatever it is, press and hold that key for 5 seconds. That should unlock you dishwasher and you can now use it normally.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

0helpful
1answer

Kenmore ultra wash machine won't run even with indicator lights on. Symbol on machine says Lock on

You have the control-lock function turned on. There should be a key located near (above or below) the lighted lock symbol. Usually, it's the Heated Dry button. Whatever it is, press and hold that key for 5 seconds. That should unlock your dishwasher and you can now use it normally.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

0helpful
1answer

Kenmore Ultra Wash Dishwasher door won't open

It seems most likely door latch stock and you going to need buy new door latch as for stock one most likely you hsve to forceit to open and replace it with new one
7helpful
2answers

My kenmore dishwasher 665-15817 has a blinking ''Lock On'' button

- To clear the flashing light you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry
0helpful
2answers

Kenmore ultra wash dishwasher

More than likely it is a shorted key. replace the touch panel.
6helpful
1answer

Dishwasher Problem

According to my ultra wash dishwasher you have to hold the no heat dry button for 4 seconds and that is how you lock and unlock the control panel
0helpful
1answer

Kenmore dishwasher skips the wash

Replace the electronic control board.Its located under the panel you select cycles from.
May 20, 2008 • Dishwashers
Not finding what you are looking for?

521 views

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Cindy Wells

Level 3 Expert

6470 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...