Question about Scosche Industries Scosche High Performance Amplifier Car Audio Amplifier

1 Answer

Lanzar amp I just bought a lanzar amp when i tried to power it up the fuse on the amp kept blowing so i tried hooking it up alone seperate from my other amp and capacitor same thing happened im lost

Posted by Wooski on

  • Anonymous Apr 30, 2009

    i have a lanzar vibe 266. it started blowing fuses after i hooked it up wrong. would there be any specific part i could replace to make it work?

×

Ad

1 Answer

Mike Ryan

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

If it keeps blowing fuses then #1 its internally damaged or "blown" .. Or #2 i would make sure you have the battery power hooked up to the + terminal and the ground wire running from the car body to the - terminal.. so if its hooked up correctly and keeps blowing fuses then it requires repair.. I wish i had better news but thats all it can be...

Posted on Aug 21, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my spa 500 amp blow a fuse every time I hook up my 15" lanzar sub to it


Because it's drawing more power than the fuse can handle get a fuse with a higher rating. A 100 app fuse worked great for main power with my setup 760w amp a 15"sub 2 10"subs and a 12" sub. Also my amp had 2 30amp fuses on it one for each channel but I ran everything out of one channel.

Aug 02, 2016 | Lanzar Car Audio & Video

1 Answer

On a lanzar 535n 5 channel 3200 watt amp what is the best way to hook up 2 lanzar max 12 inch duel voice coil subwoofers


If your amp allows it hook the the sub's to the first two channels but bridge it and only run it on 2ohms so you don't blow your sub's

May 29, 2015 | Lanzar Car Audio & Video

1 Answer

So i hooked up the amp useing the pre-existing 8 gauge wire with a 30 amp fuse it worked for about and hour and started blowing the 30 amp line fuse. i replaced the line from 8 to 4 gauge and installed an...


this sound like a case of arcing power wire it happens very very easy if u use cheap wire especially from walmart. whatever u do keep using fuses and get a batt test asap. if u take out the fuses ull burn the amp like no other and plobably burn out the power rails which will be cheaper to buy a new amp after that

Oct 05, 2010 | Lanzar VIBE266 Car Audio Amplifier

1 Answer

My amp doesnt work


their may be a short some ware check your power line and your ground i had the same problome with mine

Apr 29, 2010 | Lanzar VIBE241 Car Audio Amplifier

2 Answers

Amp blows fuses


Are you using the correct fuse? if so,
more then likely, you don't have a good ground. Try grounding to something else that has more direct connection to your frame. If that doesnt work, try getting larger power cables.
I had the same problem with my 2500w xplodes all I had to do was get a thicker cable for the ground and battery connection. What was happening, was it was needing more power then the wire and fuse could handle, so it would blow the fuse, since the higher you have it, the more power it needs to feed the watts.
I would try grounding it directly to the frame on a good part of the frame before spending another $70 on new power cables though.

Mar 09, 2010 | Car Audio & Video

1 Answer

I paid a store to hook up my lanzar vibe 241 amp and 2 lanzar 12" subs(all brand new). It sounds ok but i have a loud buzzing coming out of it constantly and when i use my power window buttons I hear a...


To get rid of the buzzing sound just go to walmart and in the car stereo section buy the $10 rca ground loop isolator, this is the best way to get rid of amp noise

Oct 11, 2009 | Lanzar VIBE241 Car Audio Amplifier

1 Answer

What size fuse is needed for lanzar vibe276


there is a problem with the wiring or the unit to make the fuse blow all the time or you are turning up to much and over powering the amp what came in there should be replaced with

Jul 05, 2009 | Lanzar VIBE276 Car Audio Amplifier

1 Answer

Not sure whats wrong with my LANZAR MXA242 AMPLIFER. Please help!


did you check the fuses on the side of the amp? put voltage meter on b+ should read 13v, take it to service center to have checked out, may have some prblems inside

May 03, 2009 | Lanzar MXA242 Car Audio Amplifier

6 Answers

Sub for lanzar mxa 282


2 X 18" Kicker CVR they will work really clean. 2000 watt max each and 1000 RMS just like your amp.

Nov 16, 2007 | Lanzar MXA282 Car Audio Amplifier

1 Answer

Keeps blowing fuses


It has a short in the wiring which is "not user fixable". I think the wires are crossed. Take it back, they need to repair or replace it. I suggest you replace it. Take the GPS with you show you can show them the problem. If you bought this on line call Lowrance and find the nearest repair center. Repair it yourself and you loose the warentee.

Aug 21, 2007 | Lowrance LMS-480MDF GPS Receiver

Not finding what you are looking for?
Scosche Industries Scosche High Performance Amplifier Car Audio Amplifier Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scosche Industries Car Audio & Video Experts

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Brad Brown

Level 3 Expert

18193 Answers

Are you a Scosche Industries Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...