Belling cooker xou90fp/444447307

Check if the oven timer is on auto mode. If it is, turn it on to manual mode .
Remove the power cable from the outlet and wait for 20 minutes. As you plug your oven back in, the oven timer should reset as well .
Hold the timer buttons down at the same time to reset the timer .
Meter the thermostat out and see if it's open circuit .
Take the top off and inspect the selector switch and see if there are any signs of burning on the switch .
How to Repair ' Smeg duel fuel range cooker A1-7 Oven not working. (how-to-repair.com)

This tutorial will show you how to check your Zanussi element and how to replace your Zanussi cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating

1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Zanussi manual.
2. If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

If this helped like us on facebook please
How to Video Tutorials on Domestic Appliances

Found this online - £101.99

Belling Stainless Steel Cooker Control Panel for DB90

http://www.espares.co.uk/part/cookers-and-hobs/belling/db90/p/1092/154/0/538873/547712/stainless-steel-cooker-co.html

replace thermostat

hi

check the timmer clock is not in auto mode as this will stop the oven from turning on. if clock ok then fault could poss be the thermostat
hope this helps you

regards dan

If it has a timer, make sure it is set to manual or it will not heat, another possibility is a faulty thermostat, you need to find out if you are getting power to the element, if you are then element should work unless you have got a faulty one.
Plz rate this solution.

This tutorial will show you how to check your Beko element and how to replace your Beko cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating

1.Your Beko oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Beko manual.
2.If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
3.When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

Paul is from the Naturally he would appreciate beer How to Repair Home...

if its flashing auto.
Press and hold the 2 buttons on the left hand - clock and cook time and then press the + button.
This then sets the time to allow manual and takes the auto off.

cheers

will

I found the following information useful, although it wasn't a belling cooker the controls appeared to be the same. Go down to the electronic timer section. http://www.prestigeappliances.com.au/owner's-manual.shtml