Question about Westinghouse LCM-22w2 Television
I fixed it! It's the power supply board.
The Westinghouse LCM 22w2 has bad capacitors on the yellow power supply
board. This is a common problem plaguing motherboards and LCD
flatpanels that use capacitors from Taiwan. If you know how to solder,
or know somebody that can, it's actually a pretty easy fix. Take out
the yellow circuit board on the inside, write down the specifications
for each of the capacitors (the cylindrical things) go to the
electronics supply store and get the replacement capacitors. You can go
over the voltage specification (not under), but keep the capacitance
value matching. Replace one at a time. Go to www.badcaps.net for
advice, tutorials and training on doing this. *You really should
replace all the capacitors*, but the very large one next to the power
plug I did leave on the board because I couldn't find a match. To my
delight, the problem went away and it was working as new!
I saved a ton of money fixing this, it's definitely worth learning how to solder to do this.
www.ctcco.com for professional hosting solutions
Posted on Apr 09, 2009
Apr 13, 2012 | HP vs15 15"LCD Flat Panel Monitor
Apr 30, 2010 | Compaq Presario M2000 Notebook
Aug 12, 2009 | Computers & Internet
Mar 11, 2009 | Dell gx 150 p3...
Jan 30, 2009 | Dell UltraSharp 2001FP 20.1" LCD Monitor
Nov 25, 2008 | Office Equipment & Supplies
Dec 27, 2007 | ViewSonic NextVision N1700w (Black,...
Dec 12, 2007 | Sony Grand WEGA KDP-57XBR2 57" Rear...
Jun 04, 2006 | HP Compaq Presario R4000 Notebook
Apr 12, 2021 | Samsung Televison & Video
234 views
Usually answered in minutes!
I have the same problem, in addition if I shut down monitor and/or computer it's 50/50 whether or not i'll be able to get the monitor to show anything besides black screen,or the lines..have had to cross fingers and keep trying to turn it back on, then leave it on indefinitely. Tried this monitor on three different pc's with same problem:-(
[email protected]
×