My reset button's a wacko and its lens driving me crazy!!!!

This is a "feature" imposed upon us by those energy-saving freaks and environmentalist-wackos. What you need to do is press and hold the clock button for 12 to 15 seconds. When you first press this button, the display will appear. Then in about 7 or 8 seconds it will disappear. Keep holding it for 12 to 15 seconds until it re-appears. Now if you release the clock button, it should remain on.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

If your PS2 works fine with most of the games and won’t play a few..Then you should try this trick to play them too on your PS2:

1. Turn on your PS2 without inserting any disc.
2. Menu screen will appear like:
3. Press the (triangle) Button to enter Version Information Menu that looks like
4. Highlight the Play Station Driver as above and again press (triangle).
5. New screen will appear like
6. Highlight the Disc Speed as above and press X button,to enter Disc Speed Menu
7. And set it from Standard to "Fast".
8. After you set Disc Speed to Fast, Press and Hold Reset Button to turn off your console.
9. Then again Press and Hold Reset Button till the Blue Light turns on.
10. Remove the Reset Button and Press it again.

Be patient and wait till the game loads itself. If your lens is in good condition then it will play game in first go else try again till it PLAY your game. If still your Grand Turismo 4 DVD wont work then you must clean your PS2 lens.Watch following video to learn about cleaning lens:
Thank you and Good Luck!

Your console is an old one,and your lens too is probably weak.Try cleaning your PS2 lens Watch Video at end of solution to clean your PS2 at home....
You can also follow these steps to make your PS2 to play GTA San Andreas:

1. Turn on your PS2 without inserting any disc.
2. On menu screen go to [options] by pressing 'triangle' button.
3. A new screen will appear select by pressing 'X' [DISC SPEED]and set it to [FAST]
4. Then insert the game disc.
5. Turn off your PS2.
6. Press and Hold the [Reset Button] till the blue light turns on.Release the Reset button and press it again.

It will take a bit more time to play game,but first i recommend you to clean your PS2 lens,watch this video.


I've got something else to add.......you can follow above steps to play DVD movies if your PS2 dont play any.....!!!

Disc read errors are mainly due to worn out lens or dirty PS2 lens.Clean your PS2 lens to get rid of this problem if your lens is dirty.Watch this video it will help you to know how to clean your PS2 lens.Watch it carefully.


Remember to keep your PS2 in Dust free environment if you don't want your PS2 lens to get dirty.
If your PS2 can not play certain games like Rock band try this tip:

1. Turn on your PS2 without inserting any disc.
2. Menu screen will appear like:
3. Press the (triangle) Button to enter Version Information Menu that looks like
4. Highlight the Play Station Driver as above and again press (triangle).
   
5. New screen will appear like
6. Highlight the Disc Speed as above and press button,to enter Disc Speed Menu
7. And set it from Standard to "Fast".
8. After you set Disc Speed to Fast, Press and Hold Reset Button to turn off your console.
9. Then again Press and Hold Reset Button till the Blue Light turns on.
10. Remove the Reset Button and Press it again.

And after that wait till your game is loaded.

Click here to view full tip.

try video reset

when ps3 is in standby mode(red light)
press and hold the power button till you hear a second beep.

standby mode press hold power........"beep"......"beep"..release power button

then try rebuilding the database and the file system in recovery consol

to get to the recovery consol press and hold the power button when ps3 is in standby mode(red light) till you hear a double beep. sometimes the ps3 does a beep then another beep and goes back into standby thsi is fine just release the power and quikly press and hold it again till you get double beep.

like on my 80g system it goes like this

ps3 standby...press hold power.......beep .........beep........stanby again....release and hold power again.......beep .........double beep...release power now you should be in recovery menu.

try video reset

when ps3 is in standby mode(red light)
press and hold the power button till you hear a second beep.

standby mode press hold power........"beep"......"beep"..release power button

then try rebuilding the database and the file system in recovery consol

to get to the recovery consol press and hold the power button when ps3 is in standby mode(red light) till you hear a double beep. sometimes the ps3 does a beep then another beep and goes back into standby thsi is fine just release the power and quikly press and hold it again till you get double beep.

like on my 80g system it goes like this

ps3 standby...press hold power.......beep .........beep........stanby again....release and hold power again.......beep .........double beep...release power now you should be in recovery menu.

first try video reset

when ps3 is in standby mode(red light)
press and hold the power button till you hear a second beep.

standby mode press hold power........"beep"......"beep"..release power button



then try rebuilding the database and the file system in recovery consol

to get to the recovery consol press and hold the power button when ps3 is in standby mode(red light) till you hear a double beep. sometimes the ps3 does a beep then another beep and goes back into standby thsi is fine just release the power and quikly press and hold it again till you get double beep.

like on my 80g system it goes like this

ps3 standby...press hold power.......beep .........beep........stanby again....release and hold power again.......beep .........double beep...release power now you should be in recovery menu.


then take it back as these steps will not void warrenty

theres a little hole on the bottom of ya controler get somethin small and press the button.you may also need a new charger.my controlers did that to now one of mine to day went wacko on cod 5 when i moved the ps button wasnt pressed but the screen still poped up then it wasnt responding correctly it made me go like this stand crouch lay down crouch lay down stand up and kept on doing it its going to affect my freinds playing when he plays splitscreen with it how do i fix it!?

Hi

You’ll need to reset your printer to clear the ink counters, after resetting it’ll not display the error code again. Follow this procedure to reset the printer--

1. Power off the printer.
2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.
3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.
4. Release power button (the screen should now say 'Service Mode').
5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.
6. Press the power button once, (the orange light should go off).
7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.
8. Press the power button, and wait until printer has shut down.
9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.
10. The page counter is now reset.

Please rate the solution & revert for further assistance.

Thanks
Rylee