Question about Xterra Fitness Xterra FS220e Elliptical Trainer

Open Question

Err After 6 minutes on the elliptical message "motor error" comes up this is an xterra el255

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code message


What Does Your Treadmill's Error Code Mean? - LifeSpan

www.lifespanfitness.com/.../what-does-your-treadmills-error-code-mean

Free
May 21, 2015 - If the running belt stops after 6 seconds of starting the treadmill, this may indicate that either the ... If there is no belt movement, or you notice a burning smell coming from the motor area, this ... An E6 or E7 error code is an incline error code. ... This will cause the incline motor to raise the running deck up.

[PDF]ERROR CODES: ADDITIONAL ERROR CODES:

www.gympart.com/TSB/.../Treadmills/.../Sportsart%20Error%20Codes.p...
ERROR 6: INCLINE ERROR - CHECK INCLINE OPERATION AND CALIBRATION. ERROR ... ERROR 1-1: AC SERVO ERROR - AC SERVO MOTOR ENCODER HAS FAILED ... error codes listed by category: treadmills, bikes, elliptical trainers. ...ERR1 Condition 1: Press speed key; walk belt doesn't move; ERR1 appears.

[PDF]Error Code Troubleshooting Guide


Jan 19, 2016 | Exercise & Fitness

1 Answer

Esprit EL 255 Motor Error


http://www.spiritfitness.com/servicedocuments/pdfs/_0002_ESPRIT/_0002_ESPIRIT_02_Ellipticals/003_OwnersManuals/2010_ESPRIT/EL255_OwnersManual_255009.pdf


2009 manual so may be difficult to find a support telephone number that works for that model, but the web site above has a free manual. The main web site has a support email address, telephone number, and Store Locator for you to pursue an answer.

http://www.spiritfitness.com/residentialownersmanuals.html



[email protected] ' 870-935-1107 ' Store Locator

Mar 03, 2014 | Spirit Esprit EL255 Elliptical

1 Answer

Why is my Precor Efx 546i elliptical showing an error message?


Precor Error 29, Excessive AC Input Current Probable Cause 1. The running belt and/or deck are badly worn.
2. Bad lower PCA.
3. Drive motor is shorted or de-magnetized causing a high power demand.
Corrective Action
  1. Check the amp draw using a clamp on AC volt-amp meter during loaded and no load conditions and compare values to a similar treadmill that is known to have a good running belt and deck. Replace the belt and/or deck if necessary. Don't forget, some units have a double sided deck which means it may be flipped over rather than replaced if it has an unused side.
  2. Test unit with a known good lower PCA. Replace lower PCA if necessary.
  3. Test unit with a known good drive motor. Replace drive motor if necessary.
Precor Error Code 29

Feb 11, 2014 | Exercise & Fitness

1 Answer

Elliptical resistance


Be aware that the resistance is often the part that requires repair. Resistance is managed magnetically, so often if the machine is working, but the resistance isn't setting correctly or at all, check the bolts that secure the magnets. If they are loose, the resistance will slip. If the bolts are fine, check the magnets themselves by using a refrigerator magnet and see if it is attracted or repelled by the your fridge magnet. If not, the magnets have de-magnetized and need to be replaced.

God bless you

May 22, 2013 | Xterra Fitness Xterra FS220e Elliptical...

1 Answer

Error message "key depressed" and no resistance on elliptical.


you will need a keypad and overlay call National Gym Supply @ 1-800 496-7278 they will need M & S #

Feb 06, 2010 | Precor EFX 546i Elliptical Version 4

1 Answer

Error 45 on Precor EFX 546 Elliptical


Precor Error 45, Lift Moving in Wrong Direction Probable Cause 1. Lift motor hysteresis.
2. Lower PCA is bad.
Corrective Action 1. The error would usually occur when the lift was already in motion (usually downward) when a lift command in the opposite direction (upward) was made. Some lift motors used in production exhibited a very long turnaround time and the lift motor would still be moving in the original commanded direction while the control system was trying to move the lift in the opposite commanded direction. If the error continues to re-occur, replace the lift motor.
2. It is a rare condition, however if the lift moves in the opposite direction commanded, replace the lower PCA.

Precor Error Code 45

Jul 19, 2009 | Precor EFX 546i Elliptical Version 4

1 Answer

Error message on elliptical machine


Try unplugging for 5 mins plug back in might reset .

Jan 23, 2018 | Kettler Mondeo Elliptical Trainer

Not finding what you are looking for?
Xterra Fitness Xterra FS220e Elliptical Trainer Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xterra Fitness Exercise & Fitness Experts

Tom Chichester

Level 3 Expert

55379 Answers

ray gallant

Level 3 Expert

67876 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Xterra Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...