Question about Behringer XENYX 502 Premium 5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ

1 Answer

Xenyx 502 I want to connect my Marshall guitar amp to the mixer which is connected to the laptop for recording and to the speaker

Posted by Zuzana Conkova on

Ad

1 Answer

Dan Balmer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 52 Answers

You can only do this with a LINE OUT of your amplifier, or HEADPHONE out, as these are line level outputs and will not hurt the inputs of your mixer. Otherwise the signal going to the mixer will be too hot and ruin it. For a Marshall amp,I would prefer to mic it anyway, and run the mic cable to the mixer.

Posted on May 05, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i connect my keyboard and my laptop?


Download USB MIDI driver for yamaha from yamaha website,and install to laptop.
Next:
Make sure the POWER switch on the instrument is set to OFF,then use an AB type USB cable to connect the instrument to the laptop.
After making the connections, turn on the power of the instrument.
Laptop will immediately notify that new hardwares is connecting and automatically install the drivers. Wait until the process is finish.
Thats all. In Ableton,the setting MIDI input must be set to USB MIDI.

Aug 19, 2015 | Yamaha PSRE413 Keyboard

1 Answer

How to connect behringer ms16 monitors to a xenyx q8o2usb?


Hello, i've read and watched the manual and the xenyx itself and what. there is to understand if you just read everything. Your speakertje come at the output of your xenyx and that thing you can use as audio source or put your soundsources in your mixer and just play it.
  • Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
So just use the mixer as your audio interface and your ready. The xenyx is nice for the money, the ms-16 which they call 'studio'-monitots is offcourse nonsens. Nice sounding laptop speakers are they, but in a home studio you need at least speaker 400euro/piece , but you can play with this nicely.

Aug 31, 2014 | Behringer Audio Players & Recorders

1 Answer

Little or no sound


Have you tried another source into the same input on the mixer and does this also come through quiet? Have you checked the gain for the channel(s) you are using? Have you tried a different wire for the connection as well as different source? Is it on all channels? have you tried a different amp?

Feb 25, 2014 | Behringer Xenyx 502 Audio Live Music Mixer...

1 Answer

Marshall MB4410, with low volume gives no real volume,


Guitar amps have preamp sections (think unpowered audio mixer) and power amp sections (Crown rack-mount amp). An excellent way to isolate audio problems if amp is still producing audio is to check the preamp out (line out). Preamp output distorted = preamp failure. Connect MP3 player to "Power Amp In"...sound distorted = power amp failure. In your case the latter is the case as your "line out" is clean. Also test each speaker for clear sound as speaker cone damage from being overpowered is fairly common. At 300w. I'll assume the failure was not from cranking the volume to loud but a shorted speaker or speaker wiring could zap the power amp in an instant.

Jan 06, 2014 | Marshall MB4410 Bass Combo Amplifier

1 Answer

Xenyx 502usb not picking up mic


It sounds like you have a condenser mic hooked up to the XLR input. Phantom is not available on the other inputs, just the XLR.

Check page 8 of the manual. http://www.behringer.com/assets/Q1202USB_Q1002USB_Q802USB_Q502USB_M_EN.pdf

Jan 05, 2014 | Behringer XENYX 502 5-Input 2-Bus Analog...

1 Answer

I am trying to record from xenyx 2442fx to audacity. I am not sure how. I think it has something to do with usb, but do not know how to connect the mixer to the computer to get a good sound. Please help.


First, connect the USB audio interface which came with the Xenyx to a USB port on the PC. Then connect the TAPE OUT from the Xenyx to the IN of the USB audio interface. And connect the OUT of the USB audio interface to the TAPE IN of the Xenyx. You should now be able to record from any of the Xenyx channels. To listen back, engage the control room button which reads CD/TAPE. Contact me if you need any clarification.

Sep 06, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

Marshal mg15fx : Noise when i connect the amp to a mixer.


Mixer uses balanced outputs, this unit does not... Also ground loops can be a problem. Make sure this and the mixer are BOTH powered from the same receptacle. The next problem is that the level of the mixer is MUCH too high for an amp designed to recieve guitar signals if you are sending a mixer into this. It is NOT clear how you are connecting this to a mixer... IF you happen to be trying to send signals from this to a mixer, either use a mic OR use a Direct Input box. You should tell us exactly how you are connecting this to the mixer since there are MANY ways, and most do not make sense.

Aug 07, 2011 | Marshall Amplification Marshall MG15FX...

1 Answer

I purchased a PV12M monitor and was wanting help connecting it to my Behringer xenyx 2442fx mixer


You will have to have an amplifeir between them since the PV12M is an unpowered speaker. The Xenyx 2442FX is likewise an unpowered mixer meaning it cannot directely drive a speaker. You will wire with a balanced line (TRS cable) between the 2442 and the amp and then from the amp to the speaker using a speaker type cable.

Jun 06, 2011 | Peavey Pv12m 12' Floor Monitor

3 Answers

Iam trying to make my behringerXENYX 1204fx mixer, / connect


I have trouble my new behringer xenyx 1204FX VU led dead , like new VU it must play , how to repair this unit VU light

Mar 13, 2010 | Behringer Xenyx 1002fx Mixer 10 Input 2...

Not finding what you are looking for?
Behringer XENYX 502 Premium 5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Behringer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...