Hi I bought this Panasonic colour T.V. second hand but their wasn't a Manuel to show how to set the channels on the T.V.. The model # is TZ-20L3Z. I know that it is a fairly old T.V. but it works very well. Can you give me a little guidance on how to set the channels up. Cheers from N.Z. Chet
Do you mean 'There wasn't a MANUAL or (Manuel as in a persons name?) (poor spelling & there as in location of NOT their as in ownership) I have a user manual (scanned into a pdf) - the question is how to get it you?
Posted on Aug 19, 2007
1.Push the (Preset) button until the on-screen display appears
2.Push either the channel up Λ -or- down V button to select the desired channel/memory location on which you want to tune your desired TV station.
3.Push either the Level adjustment up [+] -or- down [-]button. The TV station broadcaasting on the next higher/lower frequency will be automatically tuned in and memorized.
3a.If an undesired/unrequired TV station appears, push the same button + or - again to continue scanning for the next station.
4.REPEAT STEPS 2 AND 3 UNTIL ALL STATIONS HAVE BEEN SET. ENSURE THAT A NEW CHANNEL IS SELECTED (SEE STEP 2) BEFORE TUNING THE NEXT STATION ...
5.Push the [PRE] (Preset) button twice to return the TV to normal operating mode.
×
Hi Chet, At most that I can give you is a generic procedure but should work also in your unit other than the names/terms would probably be a tad different. Using your remote, press menu, select setup. You may have to select whether you are using cable or aerial. Aerial antenna could be name Air or Std. Normally there would be a search function or add channels or memory + or something like that. Am not sure but you may have a save butoon also but not always. Hope this gives you some idea. Pls post back how things are or if you need further information. Good luck and kind regards.
Posted on Aug 19, 2007
79 views
Usually answered in minutes!
This is the front pannel of the T.V.
Cheers Chet
×