Where is ice sensor in manitowoc ice machine - Kitchen Appliances - Others

In addition to the standard safety controls, your
Manitowoc ice machine features built-in safety limits
that will stop the ice machine if conditions arise which
could cause a major component failure.
Before calling for service, re-start the ice machine
using the following procedure:
1. Move the ON/OFF/WASH switch to OFF and then
back to ON.
2. If the safety limit feature has stopped the ice
machine, it will restart after a short delay.
If the ice machine stops again, the condition
has reoccurred. Call for service.

https://www.manualslib.com/manual/949928/Manitowoc-Qm30a.html?page=33#manual

Parts list...
https://cdn.shopify.com/s/files/1/2978/3482/files/qm30.pdf?14742691070479966746

When was the last time it was serviced? They need doing every year, clean coils, sanitize and descale.

https://www.google.com/search?q=manitowoc+neo+ice+machine+not+harvesting

Manitowoc - Engineered For Ease

Manitowoc Ice https://www.manitowocice.com
Manitowoc Ice 2110 South 26th Street Manitowoc, WI 54220. Phone: 920-682-0161. For Sales 920-682-0161. Facebook; Twitter; YouTube; LinkedIn.
‎Products · ‎Contact · ‎Service · ‎Downloads

..

How heavy is a Manitowoc ice machine?

America's #1 Selling Ice Machines. Weight: 114 lbs. 208-230/60/1 also available. From under counter, to auto dispensing, Manitowoc offers 17 commercial models with daily output from 45 lbs.

https://www.google.com/search?q=Manitowoc+JD0202A+weight

..

Hi, contact your local appliance repair facility, you may have problems with the control board, the ice level sensors or curtain.

Liquid line sensor on ice machines in general is used in conjunction with the control boards to determine defrost and harvest cycles. You could measure the line temp and chech the resistance of the sensor to check it.

Betabass

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jerry_8a145f1328fa119f

Service Literature Downloads - Manitowoc Ice

www.manitowocice.com/minisite/service/servicedownloads
Manitowoc Ice has a complete library of service documentation offered in two different formats. First, Interactive Electronic Document Catalog (EDC). Second .

Its plug and play. You need to call who ever sold it to you and have it checked out its under warranty.

The thickness sensor is shorting, making the machine continually harvest. Clean it and dry it. If it still happens, replace the sensor.

Machine dirty

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jerry_8a145f1328fa119f

Ice thickness probe on Manitowoc and float switch may be dirty or stuck if hoshi. Manitowoc sometime the thickness probe can get dirty and a film of algae and not sense ice properly but rare