Keyboard mouse damage external - Toshiba Satellite 1400-S151 Notebook

connect an external keyboard to you laptop and maybe even an external mouse ---- like a USB mouse and keyboard and you should be able to navigate on the laptop again

Try and external keyboard and mouse. If they work then re-install keyboard and mouse drivers by removing then first and let the OS do it.
If this doesn't work your pc might be infected. Try to clean it or save data and re-install OS, that is if the external keyboard and mouse work. If not then it is a hardware problem.

Use an external mouse and RESTORE the PC to an earlier set date. Also reinstall the drivers and use the recovery disk if there is an OS issue.
If this wont solve there can be fault in the motherboard or a damage on the pad. Clean the pad, check the rear side connections, dry if there is moisture or a spill .

YES! You need a new keyboard. Im sorry i couldnt give you a more pleasant answer.


Hope this helps

Get a wireless Mouse And Keybord..! This will save you.

Any external USB mouse can be connected to the system. As well as USB keyboard. Or specifically if you go through HP, the mouse part number is: NR152AA, and keyboard is GM321AA. As far as non-HP products you will need to check on compatibility on each. Hope this helps you in this question.

1. first check the bios.
2. you can use serial mouse or keyboard change this parallel mouse and keyboard.

try reinstall the chipset driver your laptop/pc this might problem with driver, if still not working maybe cause by hardware failure or os damage files.

*resintall the driver.
*clean install xp
*

first of all u have to re install windows( operating system)
before inserting the windows cd u have to plug an external keybord and mouse and start the system.
boot from cd and continue.
the laptop keybord and mouse could be unusable anymore.

if i were you, i would go into the bios when the machine is booting up, by pressing usually f2 or delete on the first black screen and setting all defaults in the bios, save it, then see if your mouse works.It may be that the bios is corrupt or misconfigured and that is why the integral mouse does not work.